USB mouse stopped working (kernel 2.4.0-test8)

From: Bernd Kischnick (kisch@mindless.com)
Date: Sun Sep 10 2000 - 14:39:21 EST


Hello all,

between kernel 2.4.0-test7 and test8 something has happened to break my
USB mouse.

Platform is a PowerMac equipped with an OPTI USB-controller on a PCI
card.

I've seen a lot of lockups from the USB system on test7 ---
some of them have gone in test8, especially when loading modules.

But now the mouse doesn't work at all, as apparent from the log:

Sep 10 20:37:51 (none) kernel: usb.c: registered new driver usbdevfs
Sep 10 20:37:51 (none) kernel: usb.c: registered new driver hub
Sep 10 20:37:58 (none) kernel: PCI: Enabling device 00:0e.0 (0014 ->
0016)
Sep 10 20:37:58 (none) kernel: usb-ohci.c: USB OHCI at membase
0xc71e8000, IRQ 25
Sep 10 20:37:58 (none) kernel: usb-ohci.c: usb-00:0e.0, OPTi Inc. 82C861
Sep 10 20:37:58 (none) kernel: usb.c: new USB bus registered, assigned
bus number 1
Sep 10 20:37:58 (none) kernel: usb.c: USB new device connect, assigned
device number 1
Sep 10 20:37:58 (none) kernel: hub.c: USB hub found
Sep 10 20:37:58 (none) kernel: hub.c: 2 ports detected
Sep 10 20:38:10 (none) kernel: usb.c: registered new driver hid
Sep 10 20:38:48 (none) kernel: mouse0: PS/2 mouse device for input2
Sep 10 20:38:48 (none) kernel: mouse1: PS/2 mouse device for input0
Sep 10 20:38:48 (none) kernel: mice: PS/2 mouse device common for all
mice
Sep 10 20:41:55 (none) kernel: usb.c: USB new device connect, assigned
device number 2
Sep 10 20:41:55 (none) kernel: usb.c: USB device not accepting new
address (error=-110)
Sep 10 20:41:55 (none) kernel: usb.c: USB new device connect, assigned
device number -1
Sep 10 20:41:55 (none) kernel: usb.c: USB device not accepting new
address (error=-110)
Sep 10 20:41:55 (none) kernel: usb.c: USB disconnect on device -1
Sep 10 20:41:56 (none) kernel: usb.c: USB new device connect, assigned
device number 2
Sep 10 20:41:56 (none) kernel: usb.c: USB device not accepting new
address (error=-110)
Sep 10 20:41:56 (none) kernel: usb.c: USB new device connect, assigned
device number -1
Sep 10 20:41:57 (none) kernel: usb.c: USB device not accepting new
address (error=-110)
Sep 10 20:41:57 (none) kernel: usb.c: USB disconnect on device -1
... and so on

The other mouse mentioned in the log is an Apple mouse on the ADB bus,
which works well.

See you,
- Bernd
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Fri Sep 15 2000 - 21:00:13 EST