Hello,
I just installed the latest kernel: 2.4.0-test9pre4. I have also
installed the pcmcia-cs-3.1.20 package. I have a Compaq Armada 7400 with
128 MB RAM and a 4 GB disk running Mandrake 7.0. I want to report the
following malfunction. There is something bad between the PCI, the 3c59x
cardbus driver and the PCMCIA. When I use the 3CCFE575CT, I got the
following messages:
Linux PCMCIA Card Services 3.1.20
options: [pci] [cardbus] [pm]
Yenta IRQ list 0698, PCI irq11
Socket status: 30000020
Yenta IRQ list 0698, PCI irq11
Socket status: 30000006
cs: cb_alloc(bus 2): vendor 0x10b7, device 0x5257
PCI: Failed to allocate resource 0 for PCI device 10b7:5257
PCI: Failed to allocate resource 1 for PCI device 10b7:5257
PCI: Failed to allocate resource 2 for PCI device 10b7:5257
PCI: Failed to allocate resource 6 for PCI device 10b7:5257
PCI: Device 02:00.0 not available because of resource collisions
3c59x: vortex_probe1 fails. Returns -5
cs: IO port probe 0x1000-0x17ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x100-0x107 0x220-0x22f
0x250-0x257 0x330-0x337 0x378-0x37f 0x388-0x38f 0x408-0x40f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
When I use my 3CCE589ET, everything works fine. Any ideas ?
Thanks for the support,
Claude.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Sep 23 2000 - 21:00:24 EST