My laptop reports that its IDE interface is PCI_CLASS_STORAGE_IDE,
but the code which tests for this looks all screwed up.
I changed the test as shown by the below patch, which looks like an
obviously correct fix to me.
When tested on my laptop, I now get
VP_IDE: bad irq(0): will probe later
Looking at lspci, my IDE interface doesn't report its IRQ directly via
the PCI interface, so this message looks correct (if a bit ominous).
Jeff
Index: drivers/ide/ide-pci.c
===================================================================
RCS file: /usr/jgarzik/cvslan/linux_2_3/drivers/ide/ide-pci.c,v
retrieving revision 1.1.1.8
diff -u -r1.1.1.8 ide-pci.c
--- drivers/ide/ide-pci.c 2000/07/28 05:04:35 1.1.1.8
+++ drivers/ide/ide-pci.c 2000/09/27 08:37:47
@@ -538,7 +538,7 @@
* Can we trust the reported IRQ?
*/
pciirq = dev->irq;
- if ((dev->class & ~(0xfa)) != ((PCI_CLASS_STORAGE_IDE << 8) | 5)) {
+ if ((dev->class & ~(0xff)) != (PCI_CLASS_STORAGE_IDE << 8)) {
printk("%s: not 100%% native mode: will probe irqs later\n", d->name);
/*
* This allows offboard ide-pci cards the enable a BIOS,
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Sep 30 2000 - 21:00:19 EST