Hello everybody,
I had several strange system hangs that are somehow related to CPU lockups.
Strange enough that system works without problem under high load several
days, than hungs up. Actualy system responds to ping (with usual times), but
it is impossible neither to log in, nor to exchange data after binding to,
for example, smtp port - system accepts connection, but is waiting for
something... Swap is not used. When I hit magic SysRq+T sequence system
crashed with:
NMI Watchdog detected LOCKUP on CPU 1, registers
CPU : 1
EIP : 0010: [<c01095ca>]
EFLAGS : 00000097
eax : c0273420 ebx : c029b820 ecx : c19ca000
edx : c0229d4c esi : dfb8b000 edi: 00000008
ebp : c19cbd88 esp: c19cbd80 ds: 0018 es: 0018 ss: 0018
Process kreiserfsd (pid: 5, stackpage=c19c800)
Stack: <skipped> .......
CallTrace: [<c01e4b33>] [<c0184077>] [<c0208879>] [<c01830db>] [c018b609]
[<c010ef15>] [<c018b697>] ..
Note, that several times I have seen init process instead of kreiserfsd, but
was unable to write down register dump. Also I include my boot'up dmesg,
which has some in my opinion strange complains (take a look at BIOS warnings
about CPU's, mtrr's and other cpu boot up info).
System - 2.4.0-test7+reiserfs-3.6.14, SMP 2 PIII 500, Asus P2B-D motherboard,
Symbios SYM53C8XX U2W controler, 3c905.
-----------------------
Oct 3 14:41:15 cl1 kernel: klogd 1.3-3, log source = /proc/kmsg started.
Oct 3 14:41:15 cl1 kernel: Inspecting /boot/System.map-2.4.0-test7-sym
Oct 3 14:41:16 cl1 kernel: Loaded 13187 symbols from
/boot/System.map-2.4.0-test7-sym.
Oct 3 14:41:16 cl1 kernel: Symbols match kernel version 2.4.0.
Oct 3 14:41:16 cl1 kernel: Loaded 10 symbols from 2 modules.
Oct 3 14:41:16 cl1 kernel: Linux version 2.4.0-test7-sym (root@(none)) (gcc
version 2.95.2 19991024 (release)) #2 SMP Fri Sep 29 18:32:51 CEST 2000
Oct 3 14:41:16 cl1 kernel: BIOS-provided physical RAM map:
Oct 3 14:41:16 cl1 kernel: BIOS-e820: 000000000009f800 @ 0000000000000000
(usable)
Oct 3 14:41:16 cl1 kernel: BIOS-e820: 0000000000000800 @ 000000000009f800
(reserved)
Oct 3 14:41:16 cl1 kernel: BIOS-e820: 0000000000010000 @ 00000000000f0000
(reserved)
Oct 3 14:41:16 cl1 kernel: BIOS-e820: 0000000000e00000 @ 0000000000100000
(usable)
Oct 3 14:41:16 cl1 kernel: BIOS-e820: 0000000000100000 @ 0000000000f00000
(reserved)
Oct 3 14:41:16 cl1 kernel: BIOS-e820: 000000001effd000 @ 0000000001000000
(usable)
Oct 3 14:41:16 cl1 kernel: BIOS-e820: 0000000000002000 @ 000000001fffd000
(ACPI data)
Oct 3 14:41:16 cl1 kernel: BIOS-e820: 0000000000001000 @ 000000001ffff000
(ACPI NVS)
Oct 3 14:41:16 cl1 kernel: BIOS-e820: 0000000000001000 @ 00000000fec00000
(reserved)
Oct 3 14:41:16 cl1 kernel: BIOS-e820: 0000000000001000 @ 00000000fee00000
(reserved)
Oct 3 14:41:16 cl1 kernel: BIOS-e820: 0000000000010000 @ 00000000ffff0000
(reserved)
Oct 3 14:41:16 cl1 kernel: Scan SMP from c0000000 for 1024 bytes.
Oct 3 14:41:16 cl1 kernel: Scan SMP from c009fc00 for 1024 bytes.
Oct 3 14:41:16 cl1 kernel: Scan SMP from c00f0000 for 65536 bytes.
Oct 3 14:41:16 cl1 kernel: found SMP MP-table at 000f6e80
Oct 3 14:41:16 cl1 kernel: hm, page 000f6000 reserved twice.
Oct 3 14:41:16 cl1 kernel: hm, page 000f7000 reserved twice.
Oct 3 14:41:16 cl1 kernel: hm, page 000f6000 reserved twice.
Oct 3 14:41:16 cl1 kernel: hm, page 000f7000 reserved twice.
Oct 3 14:41:16 cl1 kernel: On node 0 totalpages: 131069
Oct 3 14:41:16 cl1 kernel: zone(0): 4096 pages.
Oct 3 14:41:16 cl1 kernel: zone(1): 126973 pages.
Oct 3 14:41:16 cl1 kernel: zone(2): 0 pages.
Oct 3 14:41:16 cl1 kernel: Intel MultiProcessor Specification v1.1
Oct 3 14:41:16 cl1 kernel: Virtual Wire compatibility mode.
Oct 3 14:41:16 cl1 kernel: OEM ID: OEM00000 Product ID: PROD00000000 APIC
at: 0xFEE00000
Oct 3 14:41:16 cl1 kernel: Processor #1 Pentium(tm) Pro APIC version 17
Oct 3 14:41:16 cl1 kernel: Floating point unit present.
Oct 3 14:41:16 cl1 kernel: Machine Exception supported.
Oct 3 14:41:16 cl1 kernel: 64 bit compare & exchange supported.
Oct 3 14:41:16 cl1 kernel: Internal APIC present.
Oct 3 14:41:16 cl1 kernel: Bootup CPU
Oct 3 14:41:16 cl1 kernel: Processor #0 Pentium(tm) Pro APIC version 17
Oct 3 14:41:16 cl1 kernel: Floating point unit present.
Oct 3 14:41:16 cl1 kernel: Machine Exception supported.
Oct 3 14:41:16 cl1 kernel: 64 bit compare & exchange supported.
Oct 3 14:41:16 cl1 kernel: Internal APIC present.
Oct 3 14:41:16 cl1 kernel: Bus #0 is PCI
Oct 3 14:41:16 cl1 kernel: Bus #1 is ISA
Oct 3 14:41:16 cl1 kernel: I/O APIC #2 Version 17 at 0xFEC00000.
Oct 3 14:41:16 cl1 kernel: Int: type 3, pol 0, trig 0, bus 1, IRQ 00, APIC
ID 2, APIC INT 00
Oct 3 14:41:16 cl1 kernel: Int: type 0, pol 0, trig 0, bus 1, IRQ 01, APIC
ID 2, APIC INT 01
Oct 3 14:41:16 cl1 kernel: Int: type 0, pol 0, trig 0, bus 1, IRQ 00, APIC
ID 2, APIC INT 02
Oct 3 14:41:16 cl1 kernel: Int: type 0, pol 0, trig 0, bus 1, IRQ 03, APIC
ID 2, APIC INT 03
Oct 3 14:41:16 cl1 kernel: Int: type 0, pol 0, trig 0, bus 1, IRQ 04, APIC
ID 2, APIC INT 04
Oct 3 14:41:16 cl1 kernel: Int: type 0, pol 0, trig 0, bus 1, IRQ 05, APIC
ID 2, APIC INT 05
Oct 3 14:41:16 cl1 kernel: Int: type 0, pol 0, trig 0, bus 1, IRQ 06, APIC
ID 2, APIC INT 06
Oct 3 14:41:16 cl1 kernel: Int: type 0, pol 0, trig 0, bus 1, IRQ 07, APIC
ID 2, APIC INT 07
Oct 3 14:41:16 cl1 kernel: Int: type 0, pol 0, trig 0, bus 1, IRQ 08, APIC
ID 2, APIC INT 08
Oct 3 14:41:16 cl1 kernel: Int: type 0, pol 0, trig 0, bus 1, IRQ 09, APIC
ID 2, APIC INT 09
Oct 3 14:41:16 cl1 kernel: Int: type 0, pol 0, trig 0, bus 1, IRQ 0e, APIC
ID 2, APIC INT 0e
Oct 3 14:41:16 cl1 kernel: Int: type 0, pol 0, trig 0, bus 1, IRQ 0f, APIC
ID 2, APIC INT 0f
Oct 3 14:41:16 cl1 kernel: Int: type 0, pol 3, trig 3, bus 1, IRQ 0b, APIC
ID 2, APIC INT 10
Oct 3 14:41:16 cl1 kernel: Int: type 0, pol 3, trig 3, bus 1, IRQ 0a, APIC
ID 2, APIC INT 12
Oct 3 14:41:16 cl1 kernel: Int: type 0, pol 3, trig 3, bus 1, IRQ 0c, APIC
ID 2, APIC INT 13
Oct 3 14:41:16 cl1 kernel: Lint: type 3, pol 1, trig 1, bus 1, IRQ 00, APIC
ID ff, APIC LINT 00
Oct 3 14:41:16 cl1 kernel: Lint: type 1, pol 1, trig 1, bus 1, IRQ 00, APIC
ID ff, APIC LINT 01
Oct 3 14:41:16 cl1 kernel: Processors: 2
Oct 3 14:41:16 cl1 kernel: mapped APIC to ffffe000 (fee00000)
Oct 3 14:41:16 cl1 kernel: mapped IOAPIC to ffffd000 (fec00000)
Oct 3 14:41:16 cl1 kernel: Kernel command line:
Oct 3 14:41:16 cl1 kernel: Initializing CPU#0
Oct 3 14:41:16 cl1 kernel: Detected 501150764 Hz processor.
Oct 3 14:41:16 cl1 kernel: Console: colour VGA+ 80x25
Oct 3 14:41:16 cl1 kernel: Calibrating delay loop... 999.42 BogoMIPS
Oct 3 14:41:16 cl1 kernel: Memory: 512904k/524276k available (1178k kernel
code, 9960k reserved, 76k data, 204k init, 0k highmem)
Oct 3 14:41:16 cl1 kernel: Dentry-cache hash table entries: 65536 (order: 7,
524288 bytes)
Oct 3 14:41:16 cl1 kernel: Buffer-cache hash table entries: 32768 (order: 5,
131072 bytes)
Oct 3 14:41:16 cl1 kernel: Page-cache hash table entries: 131072 (order: 7,
524288 bytes)
Oct 3 14:41:16 cl1 kernel: Inode-cache hash table entries: 32768 (order: 6,
262144 bytes)
Oct 3 14:41:16 cl1 kernel: VFS: Diskquotas version dquot_6.4.0 initialized
Oct 3 14:41:16 cl1 kernel: Checking 386/387 coupling... OK, FPU using
exception 16 error reporting.
Oct 3 14:41:16 cl1 kernel: Enabling fast FPU save and restore... done.
Oct 3 14:41:16 cl1 kernel: Enabling unmasked SIMD FPU exception support...
done.
Oct 3 14:41:16 cl1 kernel: Checking SIMD FPU exceptions... OK, SIMD FPU
using exception 19 error reporting.
Oct 3 14:41:16 cl1 kernel: Checking 'hlt' instruction... OK.
Oct 3 14:41:16 cl1 kernel: POSIX conformance testing by UNIFIX
Oct 3 14:41:16 cl1 kernel: mtrr: v1.36 (20000221) Richard Gooch
(rgooch@atnf.csiro.au)
Oct 3 14:41:16 cl1 kernel: CPU0: Intel Pentium III (Katmai) stepping 03
Oct 3 14:41:16 cl1 kernel: per-CPU timeslice cutoff: 1426.20 usecs.
Oct 3 14:41:16 cl1 kernel: Getting VERSION: 40011
Oct 3 14:41:16 cl1 kernel: Getting VERSION: 40011
Oct 3 14:41:16 cl1 kernel: Getting ID: 1000000
Oct 3 14:41:16 cl1 kernel: Getting ID: e000000
Oct 3 14:41:16 cl1 kernel: Getting LVT0: 8700
Oct 3 14:41:16 cl1 kernel: Getting LVT1: 400
Oct 3 14:41:16 cl1 kernel: enabled ExtINT on CPU#0
Oct 3 14:41:16 cl1 kernel: ESR value before enabling vector: 00000000
Oct 3 14:41:16 cl1 kernel: ESR value after enabling vector: 00000000
Oct 3 14:41:16 cl1 kernel: CPU present map: 3
Oct 3 14:41:16 cl1 kernel: Booting processor 1/0 eip 2000
Oct 3 14:41:16 cl1 kernel: Setting warm reset code and vector.
Oct 3 14:41:16 cl1 kernel: 1.
Oct 3 14:41:16 cl1 kernel: 2.
Oct 3 14:41:16 cl1 kernel: 3.
Oct 3 14:41:16 cl1 kernel: Asserting INIT.
Oct 3 14:41:16 cl1 kernel: Waiting for send to finish...
Oct 3 14:41:16 cl1 kernel: +Deasserting INIT.
Oct 3 14:41:16 cl1 kernel: Waiting for send to finish...
Oct 3 14:41:16 cl1 kernel: +#startup loops: 2.
Oct 3 14:41:16 cl1 kernel: Sending STARTUP #1.
Oct 3 14:41:16 cl1 kernel: After apic_write.
Oct 3 14:41:16 cl1 kernel: Startup point 1.
Oct 3 14:41:16 cl1 kernel: Initializing CPU#1
Oct 3 14:41:16 cl1 kernel: Waiting for send to finish...
Oct 3 14:41:16 cl1 kernel: CPU#1 (phys ID: 0) waiting for CALLOUT
Oct 3 14:41:16 cl1 kernel: +Sending STARTUP #2.
Oct 3 14:41:16 cl1 kernel: After apic_write.
Oct 3 14:41:16 cl1 kernel: Startup point 1.
Oct 3 14:41:16 cl1 kernel: Waiting for send to finish...
Oct 3 14:41:16 cl1 kernel: +After Startup.
Oct 3 14:41:16 cl1 kernel: Before Callout 1.
Oct 3 14:41:16 cl1 kernel: After Callout 1.
Oct 3 14:41:16 cl1 kernel: CALLIN, before setup_local_APIC().
Oct 3 14:41:16 cl1 kernel: masked ExtINT on CPU#1
Oct 3 14:41:16 cl1 kernel: ESR value before enabling vector: 00000000
Oct 3 14:41:16 cl1 kernel: ESR value after enabling vector: 00000000
Oct 3 14:41:16 cl1 kernel: Calibrating delay loop... 999.42 BogoMIPS
Oct 3 14:41:16 cl1 kernel: Stack at about dfff7fbc
Oct 3 14:41:16 cl1 kernel: OK.
Oct 3 14:41:16 cl1 kernel: CPU1: Intel Pentium III (Katmai) stepping 03
Oct 3 14:41:16 cl1 kernel: CPU has booted.
Oct 3 14:41:16 cl1 kernel: Before bogomips.
Oct 3 14:41:16 cl1 kernel: Total of 2 processors activated (1998.85
BogoMIPS).
Oct 3 14:41:16 cl1 kernel: Before bogocount - setting activated=1.
Oct 3 14:41:16 cl1 kernel: Boot done.
Oct 3 14:41:16 cl1 kernel: ENABLING IO-APIC IRQs
Oct 3 14:41:16 cl1 kernel: ...changing IO-APIC physical APIC ID to 2 ... ok.
Oct 3 14:41:16 cl1 kernel: Synchronizing Arb IDs.
Oct 3 14:41:16 cl1 kernel: init IO_APIC IRQs
Oct 3 14:41:16 cl1 kernel: IO-APIC (apicid-pin) 2-0, 2-10, 2-11, 2-12,
2-13, 2-17, 2-20, 2-21, 2-22, 2-23 not connected.
Oct 3 14:41:16 cl1 kernel: ..TIMER: vector=49 pin1=2 pin2=0
Oct 3 14:41:16 cl1 kernel: activating NMI Watchdog ... done.
Oct 3 14:41:16 cl1 kernel: number of MP IRQ sources: 15.
Oct 3 14:41:16 cl1 kernel: number of IO-APIC #2 registers: 24.
Oct 3 14:41:16 cl1 kernel: testing the IO APIC.......................
Oct 3 14:41:16 cl1 kernel:
Oct 3 14:41:16 cl1 kernel: IO APIC #2......
Oct 3 14:41:16 cl1 kernel: .... register #00: 02000000
Oct 3 14:41:16 cl1 kernel: ....... : physical APIC id: 02
Oct 3 14:41:16 cl1 kernel: .... register #01: 00170011
Oct 3 14:41:16 cl1 kernel: ....... : max redirection entries: 0017
Oct 3 14:41:16 cl1 kernel: ....... : IO APIC version: 0011
Oct 3 14:41:16 cl1 kernel: .... register #02: 00000000
Oct 3 14:41:16 cl1 kernel: ....... : arbitration: 00
Oct 3 14:41:16 cl1 kernel: .... IRQ redirection table:
Oct 3 14:41:16 cl1 kernel: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
Oct 3 14:41:16 cl1 kernel: 00 000 00 1 0 0 0 0 0 0 00
Oct 3 14:41:16 cl1 kernel: 01 003 03 0 0 0 0 0 1 1 39
Oct 3 14:41:16 cl1 kernel: 02 003 03 0 0 0 0 0 1 1 31
Oct 3 14:41:16 cl1 kernel: 03 003 03 0 0 0 0 0 1 1 41
Oct 3 14:41:16 cl1 kernel: 04 003 03 0 0 0 0 0 1 1 49
Oct 3 14:41:16 cl1 kernel: 05 003 03 0 0 0 0 0 1 1 51
Oct 3 14:41:16 cl1 kernel: 06 003 03 0 0 0 0 0 1 1 59
Oct 3 14:41:16 cl1 kernel: 07 003 03 0 0 0 0 0 1 1 61
Oct 3 14:41:16 cl1 kernel: 08 003 03 0 0 0 0 0 1 1 69
Oct 3 14:41:16 cl1 kernel: 09 003 03 0 0 0 0 0 1 1 71
Oct 3 14:41:16 cl1 kernel: 0a 000 00 1 0 0 0 0 0 0 00
Oct 3 14:41:16 cl1 kernel: 0b 000 00 1 0 0 0 0 0 0 00
Oct 3 14:41:16 cl1 kernel: 0c 000 00 1 0 0 0 0 0 0 00
Oct 3 14:41:16 cl1 kernel: 0d 000 00 1 0 0 0 0 0 0 00
Oct 3 14:41:16 cl1 kernel: 0e 003 03 0 0 0 0 0 1 1 79
Oct 3 14:41:16 cl1 kernel: 0f 003 03 0 0 0 0 0 1 1 81
Oct 3 14:41:16 cl1 kernel: 10 003 03 1 1 0 1 0 1 1 89
Oct 3 14:41:16 cl1 kernel: 11 000 00 1 0 0 0 0 0 0 00
Oct 3 14:41:16 cl1 kernel: 12 003 03 1 1 0 1 0 1 1 91
Oct 3 14:41:16 cl1 kernel: 13 003 03 1 1 0 1 0 1 1 99
Oct 3 14:41:16 cl1 kernel: 14 000 00 1 0 0 0 0 0 0 00
Oct 3 14:41:16 cl1 kernel: 15 000 00 1 0 0 0 0 0 0 00
Oct 3 14:41:16 cl1 kernel: 16 000 00 1 0 0 0 0 0 0 00
Oct 3 14:41:16 cl1 kernel: 17 000 00 1 0 0 0 0 0 0 00
Oct 3 14:41:16 cl1 kernel: IRQ to pin mappings:
Oct 3 14:41:16 cl1 kernel: IRQ0 -> 2
Oct 3 14:41:16 cl1 kernel: IRQ1 -> 1
Oct 3 14:41:16 cl1 kernel: IRQ3 -> 3
Oct 3 14:41:16 cl1 kernel: IRQ4 -> 4
Oct 3 14:41:16 cl1 kernel: IRQ5 -> 5
Oct 3 14:41:16 cl1 kernel: IRQ6 -> 6
Oct 3 14:41:16 cl1 kernel: IRQ7 -> 7
Oct 3 14:41:16 cl1 kernel: IRQ8 -> 8
Oct 3 14:41:16 cl1 kernel: IRQ9 -> 9
Oct 3 14:41:16 cl1 kernel: IRQ10 -> 18
Oct 3 14:41:16 cl1 kernel: IRQ11 -> 16
Oct 3 14:41:16 cl1 kernel: IRQ12 -> 19
Oct 3 14:41:16 cl1 kernel: IRQ14 -> 14
Oct 3 14:41:16 cl1 kernel: IRQ15 -> 15
Oct 3 14:41:16 cl1 kernel: .................................... done.
Oct 3 14:41:16 cl1 kernel: calibrating APIC timer ...
Oct 3 14:41:16 cl1 kernel: ..... CPU clock speed is 501.1883 MHz.
Oct 3 14:41:16 cl1 kernel: ..... host bus clock speed is 100.2374 MHz.
Oct 3 14:41:16 cl1 kernel: cpu: 0, clocks: 1002374, slice: 334124
Oct 3 14:41:16 cl1 kernel: CPU0<T0:1002368,T1:668240,D:4,S:334124,C:1002374>
Oct 3 14:41:16 cl1 kernel: cpu: 1, clocks: 1002374, slice: 334124
Oct 3 14:41:16 cl1 kernel: CPU1<T0:1002368,T1:334112,D:8,S:334124,C:1002374>
Oct 3 14:41:16 cl1 kernel: checking TSC synchronization across CPUs: passed.
Oct 3 14:41:16 cl1 kernel: Setting commenced=1, go go go
Oct 3 14:41:16 cl1 kernel: mtrr: your CPUs had inconsistent variable MTRR
settings
Oct 3 14:41:16 cl1 kernel: mtrr: probably your BIOS does not setup all CPUs
Oct 3 14:41:16 cl1 kernel: PCI: PCI BIOS revision 2.10 entry at 0xf0730,
last bus=1
Oct 3 14:41:16 cl1 kernel: PCI: Using configuration type 1
Oct 3 14:41:16 cl1 kernel: PCI: Probing PCI hardware
Oct 3 14:41:16 cl1 kernel: PCI: Using IRQ router PIIX [8086/122e] at 00:04.0
Oct 3 14:41:16 cl1 kernel: Limiting direct PCI/PCI transfers.
Oct 3 14:41:16 cl1 kernel: Linux NET4.0 for Linux 2.4
Oct 3 14:41:16 cl1 kernel: Based upon Swansea University Computer Society
NET3.039
Oct 3 14:41:16 cl1 kernel: NET4: Unix domain sockets 1.0/SMP for Linux
NET4.0.
Oct 3 14:41:16 cl1 kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Oct 3 14:41:16 cl1 kernel: IP Protocols: ICMP, UDP, TCP
Oct 3 14:41:16 cl1 kernel: IP: routing cache hash table of 4096 buckets,
32Kbytes
Oct 3 14:41:16 cl1 kernel: TCP: Hash tables configured (established 32768
bind 32768)
Oct 3 14:41:16 cl1 kernel: Starting kswapd v1.7
Oct 3 14:41:16 cl1 kernel: Uniform Multi-Platform E-IDE driver Revision: 6.31
Oct 3 14:41:16 cl1 kernel: ide: Assuming 33MHz system bus speed for PIO
modes; override with idebus=xx
Oct 3 14:41:16 cl1 kernel: PIIX4: IDE controller on PCI bus 00 dev 21
Oct 3 14:41:16 cl1 kernel: PIIX4: chipset revision 1
Oct 3 14:41:16 cl1 kernel: PIIX4: not 100% native mode: will probe irqs later
Oct 3 14:41:16 cl1 kernel: ide0: BM-DMA at 0xd800-0xd807, BIOS settings:
hda:DMA, hdb:DMA
Oct 3 14:41:16 cl1 kernel: ide1: BM-DMA at 0xd808-0xd80f, BIOS settings:
hdc:pio, hdd:pio
Oct 3 14:41:16 cl1 kernel: hd1: C/H/S=20510/81/228 from BIOS ignored
Oct 3 14:41:16 cl1 kernel: hda: SAMSUNG CD-ROM SC-140F, ATAPI CDROM drive
Oct 3 14:41:16 cl1 kernel: hdb: SAMSUNG SV1022D, ATA DISK drive
Oct 3 14:41:16 cl1 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Oct 3 14:41:16 cl1 kernel: Floppy drive(s): fd0 is 1.44M
Oct 3 14:41:16 cl1 kernel: FDC 0 is a post-1991 82077
Oct 3 14:41:16 cl1 kernel: sym53c8xx: at PCI bus 0, device 10, function 0
Oct 3 14:41:16 cl1 kernel: sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up)
Oct 3 14:41:16 cl1 kernel: sym53c8xx: 53c895 detected with Symbios NVRAM
<scsi part skipped>
Oct 3 14:41:23 cl1 kernel: Real Time Clock Driver v1.10c
Oct 3 14:41:23 cl1 kernel: 3c59x.c:LK1.1.8 13 Aug 2000 Donald Becker and
others. http://www.scyld.com/network/vortex.html $Revision: 1.102.2.25 $
Oct 3 14:41:23 cl1 kernel: See Documentation/networking/vortex.txt
Oct 3 14:41:23 cl1 kernel: eth0: 3Com PCI 3c905 Boomerang 100baseTx at
0xb800, 00:60:08:69:82:fc, IRQ 11
Oct 3 14:41:23 cl1 kernel: 8K word-wide RAM 3:5 Rx:Tx split,
autoselect/MII interface.
Oct 3 14:41:23 cl1 kernel: MII transceiver found at address 24, status
786d.
Oct 3 14:41:23 cl1 kernel: Enabling bus-master transmits and whole-frame
receives.
Oct 3 14:41:23 cl1 kernel: ip_tables: (c)2000 Netfilter core team
Oct 3 14:41:23 cl1 kernel: reiserfs: checking transaction log (device 08:02)
...
Oct 3 14:41:23 cl1 kernel: Using r5 hash to sort names
Oct 3 14:41:23 cl1 kernel: ReiserFS version 3.6.14
Oct 3 14:41:23 cl1 kernel: VFS: Mounted root (reiserfs filesystem) readonly.
Oct 3 14:41:23 cl1 kernel: Freeing unused kernel memory: 204k freed
Oct 3 14:41:23 cl1 kernel: Adding Swap: 136512k swap-space (priority -1)
Oct 3 14:41:23 cl1 kernel: reiserfs: checking transaction log (device 08:05)
<reiserfs replay skipped>
...
Oct 3 14:41:23 cl1 kernel: eth0: first available media type: MII
Oct 3 14:42:02 cl1 kernel: Serial driver version 5.02 (2000-08-09) with
MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
Hope this helps to find out problem.
If I somehow could help debuging - just let me know.
Thanks for reading.
-- // Andrius Adomaitis Sistemu Administratorius // charta@gaumina.lt UAB Gaumina dizainas // tel.+370-85-54454 http://www.gaumina.lt - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Oct 07 2000 - 21:00:12 EST