Hi,
I want to setup the RAID.
For this I am partitioning the disks .The following
is the procedure:
fdisk /dev/hde
fdisk -n /dev/hde /*to add new partition*/
I specify the first & last cylinder
fdisk -w /dev/hde /*save & quit*/
when I do so , I get following :
The partition table has been altered!
calling ioctl() to re-read partition table.
hde:unknown partition table
What does this mean?
where am I wrong?
I am creating a /etc/raidtab file for raid
configuration .
Then # mkraid /dev/md0
I get error : device too small(0KB).
Surprisingly, while bootup itself the Partition
check shows :
hde : unknown partition table
what does this mean & how it affects the RAID setup?
hde is the externel disk I am using for RAID setup.
I am not able to post any messages to :linux-raid
group.
with regards,
Anil
__________________________________________________
Do You Yahoo!?
Yahoo! Photos - 35mm Quality Prints, Now Get 15 Free!
http://photos.yahoo.com/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Oct 07 2000 - 21:00:19 EST