hi kernelList,
i readed this thread and had the hope that it will fix my problem.
i have an older quad 166Mhz ppro machine with an intel mainbord.
it runs only with kernel command NOAPIC.
tried kernels from 2.2.15 to 2.4.0-test9.
with apic, it will boot till init of the first adaptecController
7860 (aic7xxx) and then loops with scsibus resets
attached is the output of lspci -vvv
thx in advance
stefan
-- stefan mojschewitsch
00:01.0 SCSI storage controller: Adaptec AHA-294x / AIC-7870 (rev 03) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 96 (2000ns min, 2000ns max), cache line size 08 Interrupt: pin A routed to IRQ 15 Region 0: I/O ports at f800 [size=256] Region 1: Memory at feaff000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=64K]
00:02.0 Non-VGA unclassified device: Intel Corporation 82375EB (rev 15) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 248
00:03.0 VGA compatible controller: Cirrus Logic GD 5436 [Alpine] (prog-if 00 [VGA]) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Expansion ROM at <unassigned> [disabled] [size=32K]
00:04.0 Class ff00: Intel Corporation: Unknown device 0008 Subsystem: Unknown device 0008:1000 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 0: Memory at 10000000 (32-bit, prefetchable) [size=1K] Region 1: Memory at 10000400 (32-bit, prefetchable) [size=1K] Region 2: Memory at 10000800 (32-bit, prefetchable) [size=1K] Region 3: Memory at 10000c00 (32-bit, prefetchable) [size=1K] Region 4: Memory at 10001000 (32-bit, prefetchable) [size=1K] Region 5: Memory at 10001400 (32-bit, prefetchable) [size=1K] Expansion ROM at fffff800 [disabled] [size=2K]
00:05.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30) Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 48 (2500ns min, 2500ns max), cache line size 08 Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at fc00 [size=128] Region 1: Memory at feafcc00 (32-bit, non-prefetchable) [size=128] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.0 SCSI storage controller: Adaptec AIC-7861 (rev 03) Subsystem: Adaptec AHA-2940AU Single Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 48 (1000ns min, 1000ns max), cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at f000 [size=256] Region 1: Memory at feafd000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:14.0 RAM memory: Intel Corporation 450KX/GX [Orion] - 82453KX/GX Memory controller (rev 04) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:19.0 Host bridge: Intel Corporation 450KX/GX [Orion] - 82454KX/GX PCI bridge (rev 04) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 96, cache line size 08
00:1a.0 Host bridge: Intel Corporation 450KX/GX [Orion] - 82454KX/GX PCI bridge (rev 04) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 96, cache line size 08
01:01.0 SCSI storage controller: Adaptec AHA-294x / AIC-7870 (rev 03) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 96 (2000ns min, 2000ns max), cache line size 08 Interrupt: pin A routed to IRQ 14 Region 0: I/O ports at e400 [size=256] Region 1: Memory at fcefe000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=64K]
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Oct 31 2000 - 21:00:17 EST