--- 2.2-lspci	Wed Oct 25 08:04:02 2000
+++ 2.4-fixed	Wed Oct 25 07:51:20 2000
@@ -2,15 +2,15 @@
 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
 	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
 	Latency: 32 set
-	Region 0: Memory at e0000000 (32-bit, prefetchable)
+	Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
 
 00:02.0 VGA compatible controller: Neomagic Corporation NM2160 [MagicGraph 128XD] (rev 01) (prog-if 00 [VGA])
 	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 	Interrupt: pin A routed to IRQ 11
-	Region 0: Memory at f0000000 (32-bit, prefetchable) [disabled]
-	Region 1: Memory at f5000000 (32-bit, non-prefetchable) [disabled]
-	Region 2: Memory at f5200000 (32-bit, non-prefetchable) [disabled]
+	Region 0: Memory at f0000000 (32-bit, prefetchable) [disabled] [size=16M]
+	Region 1: Memory at f5000000 (32-bit, non-prefetchable) [disabled] [size=2M]
+	Region 2: Memory at f5200000 (32-bit, non-prefetchable) [disabled] [size=1M]
 
 00:03.0 CardBus bridge: Texas Instruments PCI1131 (rev 01)
 	Subsystem: Dell Computer Corporation: Unknown device 0074
@@ -18,14 +18,14 @@
 	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 	Latency: 32 set, cache line size 08
 	Interrupt: pin A routed to IRQ 11
-	Region 0: Memory at <ignored> (32-bit, non-prefetchable)
-	Bus: primary=00, secondary=20, subordinate=22, sec-latency=176
+	Region 0: Memory at 10000000 (32-bit, non-prefetchable) [size=4K]
+	Bus: primary=00, secondary=02, subordinate=05, sec-latency=0
 	Memory window 0: 00000000-00000000 (prefetchable)
 	Memory window 1: 00000000-00000000 (prefetchable)
 	I/O window 0: 00000000-00000003
 	I/O window 1: 00000000-00000003
-	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
-	16-bit legacy interface ports at 0001
+	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt- PostWrite-
+	16-bit legacy interface ports at 03e1
 
 00:03.1 CardBus bridge: Texas Instruments PCI1131 (rev 01)
 	Subsystem: Dell Computer Corporation: Unknown device 0074
@@ -33,14 +33,14 @@
 	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 	Latency: 32 set, cache line size 08
 	Interrupt: pin B routed to IRQ 11
-	Region 0: Memory at <ignored> (32-bit, non-prefetchable)
-	Bus: primary=00, secondary=23, subordinate=25, sec-latency=176
+	Region 0: Memory at 10001000 (32-bit, non-prefetchable) [size=4K]
+	Bus: primary=00, secondary=06, subordinate=09, sec-latency=0
 	Memory window 0: 00000000-00000000 (prefetchable)
 	Memory window 1: 00000000-00000000 (prefetchable)
 	I/O window 0: 00000000-00000003
 	I/O window 1: 00000000-00000003
-	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
-	16-bit legacy interface ports at 0001
+	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt- PostWrite-
+	16-bit legacy interface ports at 03e1
 
 00:07.0 Bridge: Intel Corporation 82371AB PIIX4 ISA (rev 01)
 	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
@@ -51,14 +51,14 @@
 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 	Latency: 32 set
-	Region 4: I/O ports at ffa0
+	Region 4: I/O ports at ffa0 [size=16]
 
 00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 	Latency: 32 set
 	Interrupt: pin D routed to IRQ 11
-	Region 4: I/O ports at ece0
+	Region 4: I/O ports at ece0 [size=32]
 
 00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 01)
 	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
@@ -79,10 +79,10 @@
 	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B-
 	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 	Interrupt: pin A routed to IRQ 9
-	Region 0: Memory at f3000000 (32-bit, prefetchable)
-	Region 1: Memory at f2ffc000 (32-bit, non-prefetchable)
-	Region 2: Memory at f2000000 (32-bit, non-prefetchable)
-	Expansion ROM at 80000000 [disabled]
+	Region 0: Memory at f3000000 (32-bit, prefetchable) [size=16M]
+	Region 1: Memory at f2ffc000 (32-bit, non-prefetchable) [size=16K]
+	Region 2: Memory at f2000000 (32-bit, non-prefetchable) [size=8M]
+	Expansion ROM at 80000000 [disabled] [size=64K]
 
 01:05.0 IDE interface: CMD Technology Inc PCI0646 (rev 03) (prog-if 8f [Master SecP SecO PriP PriO])
 	Subsystem: CMD Technology Inc: Unknown device 0646
@@ -90,11 +90,11 @@
 	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 	Latency: 2 min, 4 max, 32 set
 	Interrupt: pin A routed to IRQ 9
-	Region 0: I/O ports at fcf8
-	Region 1: I/O ports at fcf0
-	Region 2: I/O ports at fce0
-	Region 3: I/O ports at fcd8
-	Region 4: I/O ports at fcc0
+	Region 0: I/O ports at fcf8 [size=8]
+	Region 1: I/O ports at fcf0 [size=4]
+	Region 2: I/O ports at fce0 [size=8]
+	Region 3: I/O ports at fcd8 [size=4]
+	Region 4: I/O ports at fcc0 [size=16]
 
 01:07.0 SCSI storage controller: Adaptec AIC-7860 (rev 03)
 	Subsystem: Adaptec: Unknown device 7860
@@ -102,8 +102,8 @@
 	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 	Latency: 4 min, 4 max, 32 set, cache line size 08
 	Interrupt: pin A routed to IRQ 9
-	Region 0: I/O ports at f800
-	Region 1: Memory at f2ffb000 (32-bit, non-prefetchable)
+	Region 0: I/O ports at f800 [size=256]
+	Region 1: Memory at f2ffb000 (32-bit, non-prefetchable) [size=4K]
 	Capabilities: [dc] Power Management version 1
 		Flags: PMEClk- AuxPwr- DSI+ D1- D2- PME-
 		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
@@ -114,6 +114,6 @@
 	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 	Latency: 3 min, 8 max, 32 set
 	Interrupt: pin A routed to IRQ 9
-	Region 0: I/O ports at fc80
-	Expansion ROM at f4000000 [disabled]
+	Region 0: I/O ports at fc80 [size=64]
+	Expansion ROM at f4000000 [disabled] [size=64K]