I'm trying to turn of the broadcast flag for a network card. But I
can't, why??
I have two network-cards in the machine and an application (rwhod) that
wants to send it's messages out on every interface that can broadcast. But
never want to broadcast anything on this interface so why not turn it
of? If I could that is..
This is what happens:
$ ifconfig eth1
eth1 Link encap:Ethernet HWaddr 00:50:BA:6E:76:63
inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:143190 errors:0 dropped:194 overruns:0 frame:0
TX packets:143584 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
Interrupt:9 Base address:0xe400
$ ifconfig eth1 -broadcast
$ ifconfig eth1
eth1 Link encap:Ethernet HWaddr 00:50:BA:6E:76:63
inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:143228 errors:0 dropped:194 overruns:0 frame:0
TX packets:143622 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
Interrupt:9 Base address:0xe400
As you can see. It still says BROADCAST.
This is on the 2.2.16 kernel and
$ ifconfig -V
net-tools 1.54
ifconfig 1.39 (1999-03-18)
/Dennis
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Nov 07 2000 - 21:00:09 EST