On Mon, 6 Nov 2000, Oliver Xymoron wrote:
> > 'init module' is still _after_ 'set mixer levels'. There is a period
> > during which the mixer levels are changed.
>
> Perhaps you mean before? Otherwise you've lost me.
Yeah, sorry, not enough coffee yet this morning.
> > The desired mixer levels should be available to the module at the time of
> > initialisation.
>
> Is this because active audio sources other than /dev/dsp writers are
> suddenly in and out of the mix? If there's nothing on the inputs, it
> shouldn't matter whether you're changing the levels.
Yes.
> The right way to do this (according to any sound engineer) is to
> initialize all the levels to zero unless told otherwise. This would
> doubtless annoy the average user, but is more or less equivalent to not
> forwarding packets by default.
The current situation is equivalent to stopping forwarding packets each
time an app on the local machine decides it wants to send its own packets,
after a period of inactivity.
Defaulting to zero on boot is fine. Defaulting to zero after the module
has been auto-unloaded and auto-loaded again is less good.
-- dwmw2- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Nov 07 2000 - 21:00:18 EST