Russell King wrote:
> Jeff Garzik writes:
> > > For example, S3 cards typically use:
> > >
> > > 0x0102, 0x42e8, 0x46e8, 0x4ae8, 0x8180 - 0x8200, 0x82e8, 0x86e8,
> > > 0x8ae8, 0x8ee8, 0x92e8, 0x96e8, 0x9ae8, 0x9ee8, 0xa2e8, 0xa6e8,
> > > 0xaae8, 0xaee8, 0xb2e8, 0xb6e8, 0xbae8, 0xbee8, 0xe2e8,
> > > 0xff00 - 0xff44
> ^^^^ PCI IO addresses
Oops, you're right :)
> If the driver isn't loaded, the port is still used by the hardware. Therefore,
> it should be reserved independent of whether we have the driver loaded/in kernel
> or not.
That logic doesn't work. If you believe that, then the core kernel
needs to be doing 100% of the request_region calls, right at bootup...
If XFree86 not fbdev is using the hardware, you can always have a stub
driver that does nothing but reserve the ports. Remember, too, that the
ports claimed depend on register settings in the video card and PCI
config space..
Jeff
-- Jeff Garzik | Building 1024 | The chief enemy of creativity is "good" sense MandrakeSoft | -- Picasso - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Nov 23 2000 - 21:00:13 EST