Hi,
I have a Sony VAIO Z505JE with ymfpci sound and built-in microphone
and speaker. Everything worked fine with 2.2.17 plus ymfpci patch,
but the 2.2.18-pre22 produces a loud screech starting as sound
initializes and ending when startup scrips load mixer settings.
This happens because of audio loop between microphone and speakers.
I found that the culprit is the change to values of array
mixer_defaults[] in ac97_codec.c, that happened in 2.2.18-pre.
Currently I run the following patch:
--- linux-2.2.18-pre22/drivers/sound/ac97_codec.c Sat Nov 18 19:04:34 2000
+++ linux-2.2.18-pre22-p3/drivers/sound/ac97_codec.c Sun Nov 19 15:37:44 2000
@@ -131,7 +131,7 @@
{SOUND_MIXER_PCM, 0x4343},
{SOUND_MIXER_SPEAKER, 0x4343},
{SOUND_MIXER_LINE, 0x4343},
- {SOUND_MIXER_MIC, 0x4343},
+ {SOUND_MIXER_MIC, 0x1111}, /* P3 - audio loop */
{SOUND_MIXER_CD, 0x4343},
{SOUND_MIXER_ALTPCM, 0x4343},
{SOUND_MIXER_IGAIN, 0x4343},
I wonder if there is a better way?
In the interests of full disclosure let me mention that YMFxxx do have
internal loopbacks that may produce the same effect and that I checked
to the best of my ability that those loopbacks are muted. Therefore
I conclude that the loopback happens inside the AC97 (if such a thing
is possible).
--Pete
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Nov 23 2000 - 21:00:18 EST