Linus Torvalds wrote:
>
> On Thu, 23 Nov 2000, Tobias Ringstrom wrote:
> > >
> > > - enable DEBUG in arch/i386/kernel/pci-i386.h. This should make the code
> > > print out what the pirq table entries are etc.
> >
> > Done. When adding the call to eisa_set_level_irq, the line
> >
> > IRQ for 00:0a.0(0) via 00:0a.0 -> PIRQ 03, mask 1eb8, excl 0000 -> newirq=9 -> assigning IRQ 9 ... OK
> >
> > was changed into
> >
> > IRQ for 00:0a.0(0) via 00:0a.0 -> PIRQ 03, mask 1eb8, excl 0000 -> newirq=9 -> assigning IRQ 9 -> edge ... OK
>
> Ok.
>
> The thing was marked as edge-triggered, which is basically always wrong
> for a PCI interrupt. The above printout just means that it now noticed
> that it was edge, and fixed it up in the ELCR.
FWIW Via's PCI to ISA bridge has a PIRQ edge/level register.
Vendor=1106h, Device=686h, PCI config offset 54h, RW
Bits 7-4 reserved, zero.
Bit 3: PIRQA# edge (clear bit for level)
Bit 2: PIRQB# edge (clear bit for level)
Bit 1: PIRQC# edge (clear bit for level)
Bit 0: PIRQD# edge (clear bit for level)
The bits are all supposed to default to zero (level).
> > > - add the line "eisa_set_level_irq(irq);" to pirq_via_set() just before
> > > the "return 1;"
> >
> > You certainly know your kernel very well... :-)
>
> That's why they pay me the big bucks. Good.
>
> I'll make it do the eisa_set_level_irq() in the generic code: it should
> always be right (we don't do it now in the PIIX4 case, for example, but
> the PIIX documentation actually says that we _should_), and there is no
> need to do it separately for each interrupt router.
So calling eisa_set_level_irq() means nothing will scream if we do not
update [for example] the above register?
Jeff
-- Jeff Garzik | Building 1024 | The chief enemy of creativity is "good" sense MandrakeSoft | -- Picasso - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Nov 23 2000 - 21:00:27 EST