Re: Netgear FA311

From: Manfred (manfred@colorfullife.com)
Date: Mon Dec 25 2000 - 11:50:59 EST


Alex wrote:
> In the logs I'm seeing this:
>
> Dec 25 15:25:18 tahallah last message repeated 2 times
> Dec 25 15:25:19 tahallah kernel: eth0: Something Wicked happened! 0783.
> Dec 25 15:25:19 tahallah kernel: eth0: Something Wicked happened! 0780.

783 means:
        Tx Underrun
        Tx Idle
        Tx Packet Error
        Tx Descriptor
        Rx Packet Error
        Rx Descriptor
        Rx OK.

Hmm. I download the Documentation from National
(http://www.national.com/pf/DP/DP83815.html),
and the the tx burst size/fill threshold/drain threshold combination is
invalid:

<<<<<<<< from natsemi.c:
 /* Configure the PCI bus bursts and FIFO thresholds. */
 /* Configure for standard, in-spec Ethernet. */
 np->tx_config = (1<<28) + /* Automatic transmit padding */
             (1<<23) + /* Excessive collision retry */
             (0x0<<20) + /* Max DMA burst = 512 byte */
             (8<<8) + /* fill threshold = 256 byte */
             2; /* drain threshold = 64 byte */
 writel(np->tx_config, ioaddr + TxConfig);
>>>>>>>>>>>>

But:
<<<<<<<< page 51
The MXDMA MUST NOT be greater than the Tx Fill Threshold
>>>>>>>>>>

Could you try this setup?
<<<<<<<<
 /* Configure the PCI bus bursts and FIFO thresholds. */
 /* Configure for standard, in-spec Ethernet. */
 np->tx_config = (1<<28) + /* Automatic transmit padding */
             (1<<23) + /* Excessive collision retry */
             (6<<20) + /* Max DMA burst = 128 byte */
             (8<<8) + /* fill threshold = 256 byte */
             8; /* drain threshold = 256 byte */
 writel(np->tx_config, ioaddr + TxConfig);
>>>>>>>>

--
  Manfred
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sun Dec 31 2000 - 21:00:08 EST