Tim Waugh wrote:
> I'm having problems with using xsane to acquire a preview from an HP
> ScanJet 5P connected to an AHA-2940. 2.3.42 is the last kernel that
> works right for me.
>
> The symptom is that the scanner starts to make scanning sounds, then
> stops, and xsane says 'Error during read: Error during device I/O'.
Tim and I have been looking at this offline. The significance
of lk 2.3.43 was the addition of a new sg driver that has an
additional interface. Recent versions of SANE use that newer
sg interface. The problem that Tim reported seemed to be caused
by timeouts ** resulting in scsi bus resets. Anyway the problem
seems to disappear with the recently released SANE 1.0.4 .
[The original report was based on SANE 1.0.3 and earlier.]
There is also a problem report with the SnapScan 1236 <--> aha152x
combination also based on SANE 1.0.3 . This one is looking
like an "uninitialized errno" bug fixed in SANE 1.0.4 .
** SANE's newer sg interface shortens the per command timeout
from 10 minutes to 10 seconds. Most other OSes interfaces in
SANE have a timeout value of 1 minute or more. I suspect 10
seconds may be too short.
Doug Gilbert
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Jan 15 2001 - 21:00:23 EST