2.4.0 and "LSR safety check engaged!\n"

From: Richard A Nelson (cowboy@vnet.ibm.com)
Date: Wed Jan 10 2001 - 16:23:29 EST

I get the subject message when trying to initiate a PPP connection over
an internal USR 56k/flex modem defined as /dev/ttyS0.

It happens with both diald and chat(from PPP).

The "LSR safety check engaged!\n" message then causes this (diald):
diald[407]: failed to get initial modem terminal attributes: Input/output error
diald[407]: could not get initial terminal attributes: Input/output error
diald[407]: failed to set terminal attributes: Input/output error
chat[803]: Can't get terminal parameters: Input/output error

The serial support at boot is:
Serial driver version 5.02 (2000-08-09) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A

Any clues ? This is keeping me at 2.2.19prex for the nonce.

Thanks, 

-- 
Rick Nelson
Life'll kill ya                         -- Warren Zevon
Then you'll be dead                     -- Life'll kill ya

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

This archive was generated by hypermail 2b29 : Mon Jan 15 2001 - 21:00:28 EST