Robert Kaiser wrote:
>
> The one I'm currently using is an old Olivetti 386SX with 5 MB, I also
> tried two more boards, one 386SX, one 386DX, both with 8MB. All showed
> the same behavior.
I tested 2.4.0 on probably the exact same box - an Olivetti M300-05
386sx with 5MB and it came up ok, except that memory detection is off
by a MB. (to be fixed in 2.4.1 or boot with mem= argument in 2.4.0)
What might be important here is your gcc & binutils (as/gas) version,
combined with a miscompile in something like __verify_write that
doesn't get used on anything but 386 (and hence went undetected).
Only thing strange on my box is that the kernel is compiled with
gcc-2.7.2 which is officially unsupported but can be managed if you
know what the gcc bugs are.
Paul.
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Jan 15 2001 - 21:00:31 EST