On Sun, 14 Jan 2001, Urban Widmark wrote:
>> eth1: Transmit timed out, status 0000, PHY status 0000,
>> resetting...
>[snip]
>> Keeps going nonstop until I ifdown eth1.
>>
>> Card worked fine 2 days ago...
>
>So what did you change?
Nothing.
>Has the machine been up since then?
No. I rebooted to W98 a few times. W98 doesn't have a driver
installed for that card though - and wont.
>Someone else with the same symptoms (in 2.4)
> http://www.uwsg.iu.edu/hypermail/linux/net/0011.0/0027.html
>
>Becker's reply
> http://www.uwsg.iu.edu/hypermail/linux/net/0011.0/0032.html
>
>"Try unplugging the system and doing a really cold boot. A soft-off does
> not reset the chip.
Tried that too.. didn't work. I switched PCI slots and whatnot
though and it works again.. <shrug>
> If this solves the problem, we will have to add code to re-load the
> EEPROM info into the chip."
If the problem recurs I will try to test it out more and report
to the list.
FWIW it is a DLink DFE 530TX.
Thanks for the reply.
----------------------------------------------------------------------
Mike A. Harris - Linux advocate - Free Software advocate
This message is copyright 2001, all rights reserved.
Views expressed are my own, not necessarily shared by my employer.
----------------------------------------------------------------------
#[Mike A. Harris bash tip #1 - separate history files per virtual console]
# Put the following at the bottom of your ~/.bash_profile
[ ! -d ~/.bash_histdir ] && mkdir ~/.bash_histdir
tty |grep "^/dev/tty[0-9]" >& /dev/null && \
export HISTFILE=~/.bash_histdir/.$(tty | sed -e 's/.*\///')
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Jan 15 2001 - 21:00:39 EST