Hello,
Here is a patch with important eepro100 fixes for 2.4 kernel:
- Big-endian fixes (double cpu->bus conversion).
- "card reports no resources" hardware timing bug workaround.
Thanks to Donald Becker.
It may also fix a problem with "wait_for_cmd_done timeout" symptom.
Best regards
Andrey
diff -u linux/drivers/net/eepro100.c linux/drivers/net/eepro100.c
--- linux/drivers/net/eepro100.c 2000/11/17 08:53:22
+++ linux/drivers/net/eepro100.c 2001/01/27 10:07:13
@@ -29,7 +29,7 @@
static const char *version =
"eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html\n"
-"eepro100.c: $Revision: 1.35 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others\n";
+"eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others\n";
/* A few user-configurable values that apply to all boards.
First set is undocumented and spelled per Intel recommendations. */
@@ -698,6 +698,7 @@
This takes less than 10usec and will easily finish before the next
action. */
outl(PortReset, ioaddr + SCBPort);
+ inl(ioaddr + SCBPort);
udelay(10);
if (eeprom[3] & 0x0100)
@@ -785,6 +786,7 @@
#endif /* kernel_bloat */
outl(PortReset, ioaddr + SCBPort);
+ inl(ioaddr + SCBPort);
udelay(10);
/* Return the chip to its original power state. */
@@ -801,7 +803,7 @@
sp->tx_ring = tx_ring_space;
sp->tx_ring_dma = tx_ring_dma;
sp->lstats = (struct speedo_stats *)(sp->tx_ring + TX_RING_SIZE);
- sp->lstats_dma = cpu_to_le32(TX_RING_ELEM_DMA(sp, TX_RING_SIZE));
+ sp->lstats_dma = TX_RING_ELEM_DMA(sp, TX_RING_SIZE);
init_timer(&sp->timer); /* used in ioctl() */
sp->full_duplex = option >= 0 && (option & 0x10) ? 1 : 0;
@@ -1002,7 +1004,9 @@
/* Set the segment registers to '0'. */
wait_for_cmd_done(ioaddr + SCBCmd);
outl(0, ioaddr + SCBPointer);
- inl(ioaddr + SCBPointer); /* XXX */
+ /* impose a delay to avoid a bug */
+ inl(ioaddr + SCBPointer);
+ udelay(10);
outb(RxAddrLoad, ioaddr + SCBCmd);
wait_for_cmd_done(ioaddr + SCBCmd);
outb(CUCmdBase, ioaddr + SCBCmd);
@@ -1010,7 +1014,6 @@
/* Load the statistics block and rx ring addresses. */
wait_for_cmd_done(ioaddr + SCBCmd);
outl(sp->lstats_dma, ioaddr + SCBPointer);
- inl(ioaddr + SCBPointer); /* XXX */
outb(CUStatsAddr, ioaddr + SCBCmd);
sp->lstats->done_marker = 0;
@@ -1045,7 +1048,7 @@
/* Start the chip's Tx process and unmask interrupts. */
wait_for_cmd_done(ioaddr + SCBCmd);
- outl(cpu_to_le32(TX_RING_ELEM_DMA(sp, sp->dirty_tx % TX_RING_SIZE)),
+ outl(TX_RING_ELEM_DMA(sp, sp->dirty_tx % TX_RING_SIZE),
ioaddr + SCBPointer);
/* We are not ACK-ing FCP and ER in the interrupt handler yet so they should
remain masked --Dragan */
@@ -1274,7 +1277,7 @@
/* Only the command unit has stopped. */
printk(KERN_WARNING "%s: Trying to restart the transmitter...\n",
dev->name);
- outl(cpu_to_le32(TX_RING_ELEM_DMA(sp, dirty_tx % TX_RING_SIZE])),
+ outl(TX_RING_ELEM_DMA(sp, dirty_tx % TX_RING_SIZE]),
ioaddr + SCBPointer);
outw(CUStart, ioaddr + SCBCmd);
reset_mii(dev);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Jan 31 2001 - 21:00:27 EST