Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Vojtech,
I've tried out your new via driver and it
appears to have solved the problem with
the mis-detected ls-120 drive, but the ata66
drives are still being run at 33.
More interestingly, the pci-clk calculations
seem to be returning badly off values.
My motherboard is a kt133a+686b btk7a from abit.
When I set the FSB to 133 with PCI=133/4=33 the
timing code returns 43mhz.
when I set the FSB to 100 with PCI=100/3=33 then
it returns 42mhz.
These are scarely different from the nominal values.
I didn't observe anything bad in the few minutes
I was running like this, but right now I've hacked
the driver back to a hardcoded 33.
What should I do next?
--phil
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Feb 15 2001 - 21:00:14 EST