ARND BERGMANN <std7652@et.FH-Osnabrueck.DE> écrit :
[...]
> > > > > Working epic100 drivers:
> > > > > - 2.4.0
> > > > > - 2.4.0-ac9
> > > >
> > > > Could you give a look at ac12 (fine here) ?
> > > >
> > > No, does not work, same problem.
> >
> > The modifications between ac9 and ac12 come from the new DMA
> > mapping.
> What about 2.4.0-ac5? That had the same problem as -ac12. Did it also have
> the new DMA mapping?
Yes. For completness (though irrelevant):
2.4.0-ac2 -> ac6 : DMA mapping + rev9 fixes from Andreas Steinmetz
2.4.0-ac7 -> ac10: Merge becker version 1.11 + pci_enable. No DMA mapping
2.4.0-ac11 : Merge becker version 1.11 + pci_enable + DMA mapping
[...]
> > They added a bug for the (already buggy ?) big-endian
> > machines. I would be surprised that something has *always* been
> > missing in the driver and your hardware triggers it*. IMHO the culprit
> > is to be found elsewhere.
> Yes, I'm pretty sure the problem is not only the epic100 driver, now that
> I have done some more investigation. With the broken drivers (I tried
> 2.4.0-ac12 and 2.4.1-ac5), something generates an enourmous amount of
> interrupts as soon as I run 'ifconfig eth0 up'. Within 10 seconds, I got
> roughly 950000 interrupts on IRQ11, instead of 30!
^^^^^^
No wonder the system feels sluggish.
> After disabling the usb-uhci (I was using the JE driver) in the BIOS
> setup, the system reproducibly locked up hard a few seconds after
> 'ifconfig eth0 up' instead of just getting slow.
The following informations may help:
- motherboard type
- bios revision
- lspci -x
- 2.4.2pre3 + whatever recent ac epic100 = ?
-- Ueimor - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Feb 15 2001 - 21:00:15 EST