Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Ishikawa <ishikawa@yk.rim.or.jp> wrote:
>
> I have begun using devfs for about a couple of weeks now and
> thank you for the great addition to linux.
> Now I am happy to see the device names on the
> scsi chain which won't be changed just because
> I add/delete a device.
>
> However, I noticed that there seems to be a subtle interaction of
> devfs (+devfsd) and
> the device names that appear under luns for
> a scsi chain.
>
> Namely the name "generic" or "disc" seem to
> exist from the start (after bootup), but
> the entry "cd" doesn't exist until I do something
> about accessing the CD somehow.
> (It seems that I fail the initial
> attempt to mount due to the missing name.)
>
> [snip, ls on /dev/scsi/* looks correct]
>
> Is it possible that the accessing the CD using the
> compatibility device name /dev/sr* forced
> the creation of the "cd" device name?
Yes, the LOOKUP rule caused 'modprobe sr_mod' to be
executed, then your cd devices will be visible in
devfs and accessible. Under the old /dev system
they were always "visible" but not accessible until
you loaded sr_mod .
> I consider the possibility of module loading. Both SCSI CD and
> SCSI generic (sg) are modules now.
> I checked /etc/devfs/devfs.conf (experimental Debian package
> puts the config file here! ) has the following line:
>
> LOOKUP .* MODLOAD
>
> So the module autoloading ought to work. ("generic" exists
> somehow from the start.)
Chiaki,
The upper level scsi drivers (sd, sr, st, osst and sg) register
and unregister device names with devfs. After the mid level
recognizes a new scsi device it calls the detect() function
in the builtin upper level drivers and those that are currently
loaded as modules. That is your "problem", sr_mod.o is not
loaded until you do something like "ls -l /dev/sr0" (due to
that LOOKUP rule in /etc/devfsd.conf). The lsmod command will
show which modules are loaded (in your case look for sr_mod).
There is no "push" mechanism in the scsi mid level to load
the sr_mod.o module when it sees a device with SCSI type
CDROM. Devfs (specifically devfsd) supplies various "pull"
mechanisms (e.g. LOOKUP) to load that module.
Doug Gilbert
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Feb 15 2001 - 21:00:15 EST