Hi Linus,
this patch fixes a bunch of wrong uses of the config language.
Remaining problems are:
- cris uses a 'hwaddr' symbol (MAC address?) that is not supported
by any interpreter
- a few symbols do not yet have the CONFIG_ prefix (also mostly cris)
- ppc does some strange stuff with define_bool and choices.
Please consisder applying for 2.4.2.
Christoph
-- Of course it doesn't work. We've performed a software upgrade.diff -uNr linux-2.4.2-pre3/arch/cris/config.in linux/arch/cris/config.in --- linux-2.4.2-pre3/arch/cris/config.in Sat Feb 10 20:03:13 2001 +++ linux/arch/cris/config.in Sat Feb 10 20:08:07 2001 @@ -14,21 +14,21 @@ mainmenu_option next_comment comment 'General setup' -bool 'Networking support' CONFIG_NET y -bool 'System V IPC' CONFIG_SYSVIPC y +bool 'Networking support' CONFIG_NET +bool 'System V IPC' CONFIG_SYSVIPC -tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF y +tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then tristate 'Kernel support for JAVA binaries' CONFIG_BINFMT_JAVA fi -bool 'Use kernel gdb debugger' CONFIG_KGDB n +bool 'Use kernel gdb debugger' CONFIG_KGDB -bool 'Enable Etrax100 watchdog' CONFIG_ETRAX_WATCHDOG y +bool 'Enable Etrax100 watchdog' CONFIG_ETRAX_WATCHDOG -bool 'Use serial console (on the debug port)' CONFIG_USE_SERIAL_CONSOLE y +bool 'Use serial console (on the debug port)' CONFIG_USE_SERIAL_CONSOLE -bool 'Use in-kernel ifconfig/route setup' CONFIG_KERNEL_IFCONFIG n +bool 'Use in-kernel ifconfig/route setup' CONFIG_KERNEL_IFCONFIG endmenu diff -uNr linux-2.4.2-pre3/arch/ia64/config.in linux/arch/ia64/config.in --- linux-2.4.2-pre3/arch/ia64/config.in Thu Jan 4 21:50:17 2001 +++ linux/arch/ia64/config.in Sat Feb 10 20:08:53 2001 @@ -70,7 +70,7 @@ if [ "$CONFIG_ITANIUM_BSTEP_SPECIFIC" = "y" ]; then bool ' Enable Itanium B0-step specific code' CONFIG_ITANIUM_B0_SPECIFIC fi - bool ' Enable SGI Medusa Simulator Support' CONFIG_IA64_SGI_SN1_SIM n + bool ' Enable SGI Medusa Simulator Support' CONFIG_IA64_SGI_SN1_SIM define_bool CONFIG_DEVFS_DEBUG y define_bool CONFIG_DEVFS_FS y define_bool CONFIG_IA64_BRL_EMU y @@ -79,8 +79,8 @@ define_bool CONFIG_SGI_IOC3_ETH y define_bool CONFIG_PERCPU_IRQ y define_int CONFIG_CACHE_LINE_SHIFT 7 - bool ' Enable DISCONTIGMEM support' CONFIG_DISCONTIGMEM y - bool ' Enable NUMA support' CONFIG_NUMA y + bool ' Enable DISCONTIGMEM support' CONFIG_DISCONTIGMEM + bool ' Enable NUMA support' CONFIG_NUMA fi define_bool CONFIG_KCORE_ELF y # On IA-64, we always want an ELF /proc/kcore. diff -uNr linux-2.4.2-pre3/arch/m68k/config.in linux/arch/m68k/config.in --- linux-2.4.2-pre3/arch/m68k/config.in Thu Jan 4 22:00:55 2001 +++ linux/arch/m68k/config.in Sat Feb 10 20:11:25 2001 @@ -487,8 +487,10 @@ fi fi if [ "$CONFIG_APOLLO" = "y" ]; then - bool 'Support for DN serial port (dummy)' CONFIG_SERIAL + bool 'Support for DN serial port (dummy)' CONFIG_DN_SERIAL bool 'Support for serial port console' CONFIG_SERIAL_CONSOLE + + define_tristate CONFIG_SERIAL $CONFIG_DN_SERIAL fi bool 'Support for user serial device modules' CONFIG_USERIAL bool 'Watchdog Timer Support' CONFIG_WATCHDOG diff -uNr linux-2.4.2-pre3/arch/mips/config.in linux/arch/mips/config.in --- linux-2.4.2-pre3/arch/mips/config.in Thu Nov 16 21:51:28 2000 +++ linux/arch/mips/config.in Sat Feb 10 20:12:01 2001 @@ -329,7 +329,10 @@ # if [ "$CONFIG_ACCESSBUS" = "y" ]; then # bool 'MAXINE Access.Bus mouse (VSXXX-BB/GB) support' CONFIG_DTOP_MOUSE # fi - bool 'Enhanced Real Time Clock Support' CONFIG_RTC + bool 'Enhanced Real Time Clock Support' CONFIG_MIPS_RTC + + define_tristate CONFIG_RTC $CONFIG_MIPS_RTC + endmenu fi diff -uNr linux-2.4.2-pre3/arch/parisc/config.in linux/arch/parisc/config.in --- linux-2.4.2-pre3/arch/parisc/config.in Tue Dec 5 21:29:39 2000 +++ linux/arch/parisc/config.in Sat Feb 10 20:09:22 2001 @@ -25,14 +25,14 @@ # bool 'GSC/Gecko bus support' CONFIG_GSC y define_bool CONFIG_GSC y -bool 'U2/Uturn I/O MMU' CONFIG_IOMMU_CCIO y -bool 'LASI I/O support' CONFIG_GSC_LASI y +bool 'U2/Uturn I/O MMU' CONFIG_IOMMU_CCIO +bool 'LASI I/O support' CONFIG_GSC_LASI -bool 'PCI bus support' CONFIG_PCI y +bool 'PCI bus support' CONFIG_PCI if [ "$CONFIG_PCI" = "y" ]; then - bool 'GSCtoPCI/DINO PCI support' CONFIG_GSC_DINO y - bool 'LBA/Elroy PCI support' CONFIG_PCI_LBA n + bool 'GSCtoPCI/DINO PCI support' CONFIG_GSC_DINO + bool 'LBA/Elroy PCI support' CONFIG_PCI_LBA fi if [ "$CONFIG_PCI_LBA" = "y" ]; then diff -uNr linux-2.4.2-pre3/arch/sparc/config.in linux/arch/sparc/config.in --- linux-2.4.2-pre3/arch/sparc/config.in Sat Feb 3 14:51:11 2001 +++ linux/arch/sparc/config.in Sat Feb 10 20:09:50 2001 @@ -183,8 +183,8 @@ mainmenu_option next_comment comment 'SCSI low-level drivers' - tristate 'Sparc ESP Scsi Driver' CONFIG_SCSI_SUNESP $CONFIG_SCSI - tristate 'PTI Qlogic,ISP Driver' CONFIG_SCSI_QLOGICPTI $CONFIG_SCSI + dep_tristate 'Sparc ESP Scsi Driver' CONFIG_SCSI_SUNESP $CONFIG_SCSI + dep_tristate 'PTI Qlogic,ISP Driver' CONFIG_SCSI_QLOGICPTI $CONFIG_SCSI endmenu fi endmenu diff -uNr linux-2.4.2-pre3/arch/sparc64/config.in linux/arch/sparc64/config.in --- linux-2.4.2-pre3/arch/sparc64/config.in Sat Feb 3 14:51:11 2001 +++ linux/arch/sparc64/config.in Sat Feb 10 20:10:26 2001 @@ -161,15 +161,15 @@ mainmenu_option next_comment comment 'SCSI low-level drivers' - tristate 'Sparc ESP Scsi Driver' CONFIG_SCSI_SUNESP $CONFIG_SCSI - tristate 'PTI Qlogic, ISP Driver' CONFIG_SCSI_QLOGICPTI $CONFIG_SCSI + dep_tristate 'Sparc ESP Scsi Driver' CONFIG_SCSI_SUNESP $CONFIG_SCSI + dep_tristate 'PTI Qlogic, ISP Driver' CONFIG_SCSI_QLOGICPTI $CONFIG_SCSI if [ "$CONFIG_PCI" != "n" ]; then dep_tristate 'Adaptec AIC7xxx support' CONFIG_SCSI_AIC7XXX $CONFIG_SCSI if [ "$CONFIG_SCSI_AIC7XXX" != "n" ]; then bool ' Enable tagged command queueing (TCQ) by default' CONFIG_AIC7XXX_TAGGED_QUEUEING int ' Maximum number of TCQ commands per device' CONFIG_AIC7XXX_CMDS_PER_DEVICE 8 - bool ' Collect statistics to report in /proc' CONFIG_AIC7XXX_PROC_STATS N + bool ' Collect statistics to report in /proc' CONFIG_AIC7XXX_PROC_STATS int ' Delay in seconds after SCSI bus reset' CONFIG_AIC7XXX_RESET_DELAY 5 fi dep_tristate 'NCR53C8XX SCSI support' CONFIG_SCSI_NCR53C8XX $CONFIG_SCSI diff -uNr linux-2.4.2-pre3/drivers/atm/Config.in linux/drivers/atm/Config.in --- linux-2.4.2-pre3/drivers/atm/Config.in Fri Dec 29 23:35:47 2000 +++ linux/drivers/atm/Config.in Sat Feb 10 20:06:10 2001 @@ -56,7 +56,7 @@ tristate 'FORE Systems 200E-series' CONFIG_ATM_FORE200E_MAYBE if [ "$CONFIG_ATM_FORE200E_MAYBE" != "n" ]; then if [ "$CONFIG_PCI" = "y" ]; then - bool ' PCA-200E support' CONFIG_ATM_FORE200E_PCA y + bool ' PCA-200E support' CONFIG_ATM_FORE200E_PCA if [ "$CONFIG_ATM_FORE200E_PCA" = "y" ]; then bool ' Use default PCA-200E firmware (normally enabled)' CONFIG_ATM_FORE200E_PCA_DEFAULT_FW if [ "$CONFIG_ATM_FORE200E_PCA_DEFAULT_FW" = "n" ]; then @@ -65,7 +65,7 @@ fi fi if [ "$CONFIG_SBUS" = "y" ]; then - bool ' SBA-200E support' CONFIG_ATM_FORE200E_SBA y + bool ' SBA-200E support' CONFIG_ATM_FORE200E_SBA if [ "$CONFIG_ATM_FORE200E_SBA" = "y" ]; then bool ' Use default SBA-200E firmware (normally enabled)' CONFIG_ATM_FORE200E_SBA_DEFAULT_FW if [ "$CONFIG_ATM_FORE200E_SBA_DEFAULT_FW" = "n" ]; then diff -uNr linux-2.4.2-pre3/drivers/char/Config.in linux/drivers/char/Config.in --- linux-2.4.2-pre3/drivers/char/Config.in Fri Dec 29 23:07:21 2000 +++ linux/drivers/char/Config.in Sat Feb 10 20:06:21 2001 @@ -176,7 +176,7 @@ fi endmenu -tristate '/dev/agpgart (AGP Support)' CONFIG_AGP $CONFIG_DRM_AGP +dep_tristate '/dev/agpgart (AGP Support)' CONFIG_AGP $CONFIG_DRM_AGP if [ "$CONFIG_AGP" != "n" ]; then bool ' Intel 440LX/BX/GX and I815/I840/I850 support' CONFIG_AGP_INTEL bool ' Intel I810/I815 (on-board) support' CONFIG_AGP_I810 diff -uNr linux-2.4.2-pre3/drivers/media/video/Config.in linux/drivers/media/video/Config.in --- linux-2.4.2-pre3/drivers/media/video/Config.in Wed Aug 23 23:59:55 2000 +++ linux/drivers/media/video/Config.in Sat Feb 10 20:06:41 2001 @@ -23,7 +23,7 @@ fi dep_tristate ' CPiA Video For Linux' CONFIG_VIDEO_CPIA $CONFIG_VIDEO_DEV if [ "$CONFIG_VIDEO_CPIA" != "n" ]; then - if [ "CONFIG_PARPORT_1284" != "n" ]; then + if [ "$CONFIG_PARPORT_1284" != "n" ]; then dep_tristate ' CPiA Parallel Port Lowlevel Support' CONFIG_VIDEO_CPIA_PP $CONFIG_VIDEO_CPIA $CONFIG_PARPORT fi if [ "$CONFIG_USB" != "n" ]; then diff -uNr linux-2.4.2-pre3/drivers/usb/serial/Config.in linux/drivers/usb/serial/Config.in --- linux-2.4.2-pre3/drivers/usb/serial/Config.in Sat Feb 3 14:51:13 2001 +++ linux/drivers/usb/serial/Config.in Sat Feb 10 20:06:58 2001 @@ -4,7 +4,7 @@ mainmenu_option next_comment comment 'USB Serial Converter support' -tristate 'USB Serial Converter support' CONFIG_USB_SERIAL $CONFIG_USB +dep_tristate 'USB Serial Converter support' CONFIG_USB_SERIAL $CONFIG_USB if [ "$CONFIG_USB_SERIAL" != "n" ]; then bool ' USB Serial Converter verbose debug' CONFIG_USB_SERIAL_DEBUG bool ' USB Generic Serial Driver' CONFIG_USB_SERIAL_GENERIC - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Feb 15 2001 - 21:00:15 EST