Alan Cox wrote:
>> Feb 13 05:23:27 bertha kernel: hdo: dma_intr: status=0x51 { DriveReady
>> SeekComplete Error }
>> Feb 13 05:23:27 bertha kernel: hdo: dma_intr: error=0x84 { DriveStatusError
>> BadCRC }
>
>You have inadequate cabling. CRC errors are indications of that. Make sure you
>are using sufficiently short cables for ATA33 and proper 80pin ATA66 cables.
I've had cases (on VIA chipsets) where, even or ATA33, a 40-pin cable
caused CRC errors for ATA33 and an 80-pin cable fixed things. (The same
40-pin cable does ATA33 without problems on an AMD 750 or an Intel BX,
though.)
IIRC, Andre Hedrick has said in the past that a marginal PSU or
motherboard can also cause CRC errors.
-Barry K. Nathan <barryn@pobox.com>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Feb 15 2001 - 21:00:25 EST