Hello,
I've got Plexwriter 12x10x32S attached to an onbard AIC7890
(besides other things as three IBM UWSCSI harddisks, an SCSI ZIP and a
Pioneer DVD) and sometimes when recording a CD the Plexwriter fails at the
very end of the process (although the CD is recorded correctly) and it is
locked with no posibility to eject it (it seems that a failure while
reading from the DVD during on-the-fly recording is the cause).
But if I reset the SCSI bus manually, that is trying to read from
a "reset-it CD", that is completely broken and makes the SCSI bus resets
itself, I can eject the CD from the Plexwriter. So I would like to know if
there is a way to do it without that trick. I've downloaded some utilities
for the SCSI generic driver, one of them should let you reset the bus (or
even just a single device) but it fails with "SCSI_RESET" not supported
and after reading through the docs it seems that the kernel (or should I
say the SCSI drivers) doesn't support this kind of reset.
I would like to know if this is "kernel politics", "faulty
hardware", or just lazy programmers ;-), thanks and please CC the answer
to me as I'm not subscribed to this mailing list.
- german
---------------------------------------------------------------------------
German Gomez Garcia | "This isn't right. This isn't even wrong."
<german@pinon.ccu.uniovi.es> | -- Wolfgang Pauli
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Feb 15 2001 - 21:00:25 EST