On Thu, Feb 15, 2001 at 01:22:31PM +0200, you [Ville Herva] claimed:
> On Thu, Feb 15, 2001 at 06:08:12AM -0500, you [Doug Ledford] claimed:
> >
> > There was a new aic7xxx driver (version 5.2.3) that went into the 2.4.1ac
> > kernel series around 2.4.1-ac7. I would be curious to know if it worked on
> > your machine properly.
>
> Ok. Will try.
Tried 2.4.1ac13 vanilla. Still a no-go:
SCSI host 0 abort (pid 0) timed out - resetting
SCSI bus is neing reset for host 0 channel 0
(scsi0:0:0:0) Synchronous at 40.0MBytes/s offset 31
SCSI host 0 abort (pid 0) timed out - trying harder
SCSI bus is being reset for host 0 channel 0
(scsi0:0:0:0) Synchronous at 40.0MBytes/s offset 31
scsi: aborting command due to timeout pid 0 scsi 0 channel 0 id 0 lun 0
Read (10) 00 00 00 00 00 00 00 02 00
SCSI SIGI 0x14 SEDADDR 0x77 SSTAT 0x0 SSTAT 0x2 SG_CACHEPTR 0x6 SSTAT2 0xC0 ST 0x0F0
(copied by hand, so please excuse the typos.)
Although 2.4.1ac13+Gibbs's aic7xxx seems to work perfectly, I still
wouldn't count out the possibility a hardware fault of some kind, since the
box already begun failing to find the boot record at 80MB/sec as well.
-- v --
v@iki.fi
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Feb 15 2001 - 21:00:26 EST