I knew my performance hit had to be coming from somewhere...
I'm using an MSI K7T Pro mtherboard (KT133 chipset) and a Voodoo3 2000.
I can't seem to set bus mastering on the AGP card at all. This does not
work:
setpci -s 01:00.0 4.w=0007 (setpci -s 01:00.0 4.w gives me 0003)
Nor does:
setpci -s 01:00.0 COMMAND=0007
No permutation of this works. No error messages are returned, but the
register remains unchanged at 3. I have tried using -H1 and -H2, to no
avail (-H2 doesn't even get there, complaining about something on the
normal PCI bus). I have tried this with the BIOS set on "PnP OS" and
off, with no difference. My guess is that this is a motherboard
specific problem (broken BIOS, anyone), though I don't think I've heard
of a broken BIOS causing unwriteable PCI config registers. For what
it's worth, I've attached the output of 'lspci -vv -s 0:1.0' (the AGP
host bridge) and 'lspci -vv -s 1:0.0' (the card).
Thanks for any help you may have...
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: d0000000-d3ffffff
Prefetchable memory behind bridge: d4000000-d5ffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: <available only to root>
01:00.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 3 (rev 01) (prog-if 00 [VGA])
Subsystem: 3Dfx Interactive, Inc. Voodoo3 AGP
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Interrupt: pin A routed to IRQ 9
Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=32M]
Region 1: Memory at d4000000 (32-bit, prefetchable) [size=32M]
Region 2: I/O ports at c000 [size=256]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: <available only to root>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Feb 23 2001 - 21:00:29 EST