NCR53c8xx driver and multiple controllers...(not new prob)

From: LA Walsh (law@sgi.com)
Date: Sat Mar 24 2001 - 11:52:02 EST

I have a machine with 3 of these controllers (a 4 CPU server). The
3 controllers are:
ncr53c810a-0: rev=0x23, base=0xfa101000, io_port=0x2000, irq=58
ncr53c810a-0: ID 7, Fast-10, Parity Checking
ncr53c896-1: rev=0x01, base=0xfe004000, io_port=0x3000, irq=57
ncr53c896-1: ID 7, Fast-40, Parity Checking
ncr53c896-2: rev=0x01, base=0xfe004400, io_port=0x3400, irq=56
ncr53c896-2: ID 7, Fast-40, Parity Checking
ncr53c896-2: on-chip RAM at 0xfe002000

I'd like to be able to make a kernel with the driver compiled in and
no loadable module support. It don't see how to do this from the
documentation -- it seems to require a separate module loaded for
each controller. When I compile it in, it only see the 1st controller
and the boot partition I think is on the 3rd. Any ideas?

This problem is present in the 2.2.x series as well as 2.4.x (x up to 2).

Thanks,
-linda 

-- 
L A Walsh                        | Trust Technology, Core Linux, SGI
law@sgi.com                      | Voice: (650) 933-5338
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

This archive was generated by hypermail 2b29 : Sat Mar 31 2001 - 21:00:10 EST