I had tried 6.1.8 + 2.4.3 and had problems which included messages like
'aic7xxx_abort returns 8194' and machine froze up shortly after X started.
This on redhat 7.0. Sorry but since I was unable to even boot back the
prev kernel (2.4.0) I cant provide any more detailed information. I have
been following to see a few other folks have had some issues with scsi as well.
I have 2 lvd scsi disks and one ide, AH 2940U2 - top of lilo included below -
and bios boot order is scsi first.
So I started again - installed redhat 7.0.9.
took 2.4.4-pre1 and patched it with
linux-aic7xxx-6.1.10-2.4.3.patch
Patch applied cleanly but when I compile it complains a little:
In file included from aic7xxx_linux.c:131:
aic7xxx_osm.h: In function `ahc_pci_read_config':
aic7xxx_osm.h:862: warning: control reaches end of non-void function
(for several .c files but always refers to 'ahc_pci_read_config')
In file included from ... include/linux/raid/md.h:50,
from init/main.c:24: ..include/linux/raid/md_k.h: In function `pers_to_level':
raid/md_k.h:39: warning: control reaches end of non-void function
Do I need to be concerned here? I dont whether the presumed missing return is
a bad thing or not.
I have not yet tried to boot this kernel.
Also
# lilo.conf
boot=/dev/sda
disk=/dev/sda
bios=0x80
disk=/dev/sdb
bios=0x81
disk=/dev/hda
bios=0x82
map=/boot/map
install=/boot/boot.b
prompt
timeout=50
message=/boot/message
lba32
default=linux
...
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Apr 07 2001 - 21:00:19 EST