Hi Linas Vepstas,
(nice name ;-)
> First problem: In kernel-2.4.2 and earlier, if the machine is not cleanly
> shut down, then upon reboot, RAID reconstruction is automatically started.
> (For RAID-1, this more-or-less ammounts to copying the entire contents
> of one disk partition on one disk to another). The reconstruction
> code seems to be clever: it will try to use the full bandwidth when
> the system is idle, and it will throttle back when busy. It will
> only throttle back so far: it tries to maintain at least a minimum amount
> of work going, in order to gaurentee forward progress even on a busy system.
>
> The problem: this dramatically slows fsck after an unclean shut-down.
> You can hear the drives machine-gunning. I haven't stop-watch timed it,
> but its on the order of 5x slower to fsck a raid partition when there's
> reconstruction going on, then when the raid thinks its clean. This
> makes unclean reboots quite painful.
>
> (There is no config file to disable/alter this .. no work-around that I
> know of ..)
One possible 'work-around' is to use a journaling filesystem (like
reiserfs) which eliminates the fsck after a unclean shutdown. It's very
nice to have a crashed system back online fast. The raid sync makes the
system a bit slow, but as you said, it syncs at full speed when idle,
and is nice when less idle. :-)
Ookhoi
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Apr 23 2001 - 21:00:21 EST