Vibol Hou wrote:
>
> Hi,
>
> I'm using 2.4.4-pre3 and get this message occasionally when the system is
> loaded:
>
> Apr 17 16:10:12 omega kernel: eth0: Too much work in interrupt, status e401.
> Apr 17 16:10:12 omega kernel: eth0: Too much work in interrupt, status e401.
I got that one too, PC is ASUS P2B-DS with two PII-350, 384MB RAM,
3C905B.
I've tried 3C905C to no avail.
The e401 status seems to be that there is too much load on the card to
be treated in the 20 (2.2.17) or 32 (2.2.19, 2.4.x) loops of the
interruption
check routine (stop/hit me if i'm wrong please).
I think we should try (MM. Donald Becker or Andrew Norton,
is this a Bad Thing ?) to change max_interrupt_work (3c59x.c, row 171)
to 64
or maybe even higher. Haven't had the guts to try on the production
machine
right now =)
> The nic is a 3Com 3c905B. Is this a bad thing?
I heard they work fine...
François Cami
There And Back Again
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Apr 23 2001 - 21:00:34 EST