On Wed, 2 May 2001, Cabaniols, Sebastien wrote:
> I insert the 3c59x module with debug=7.
Why ? debug=7 is the highest debug level and produces _lots_ of debug data
for high network activity. Do you have problems when insmod-ing without
any option and use a higher debug level just to see what's going on?
> The first of the above machines launching the get freezes.
Why do you believe that the card/driver is responsible for the freeze ?
The outputs that you provided show no problems to me.
A duplex mismatch would not freeze a computer. You would get crappy
transfer rates, usually some error messages from the driver, but
everything should otherwise work. To verify the media settings, you might
want to use mii-diag (from ftp.scyld.com).
Sincerely,
Bogdan Costescu
IWR - Interdisziplinaeres Zentrum fuer Wissenschaftliches Rechnen
Universitaet Heidelberg, INF 368, D-69120 Heidelberg, GERMANY
Telephone: +49 6221 54 8869, Telefax: +49 6221 54 8868
E-mail: Bogdan.Costescu@IWR.Uni-Heidelberg.De
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon May 07 2001 - 21:00:13 EST