"george anzinger wrote:"
> To show the problem do:
>
> make xconfig ARCH=ppc
>
> in the "Platform support" menu "Processor Type" select "8xx" then close
> the subminue with "MainMenu"
>
> now select "Save and Exit"
>
> This produces the following error messages:
>
> ERROR - Attempting to write value for unconfigured variable
> (CONFIG_SCC_ENET).
> ERROR - Attempting to write value for unconfigured variable
> (CONFIG_FEC_ENET).
The following patch shold fix it. It is against 2.4.3-ac14, but should
cleanly apply to the Linus's tree also.
Andrzej
***********************************************************************
diff -ur linux-2.4.3-ac14/arch/ppc/8260_io/Config.in linux/arch/ppc/8260_io/Config.in
--- linux-2.4.3-ac14/arch/ppc/8260_io/Config.in Mon Nov 13 23:13:15 2000
+++ linux/arch/ppc/8260_io/Config.in Thu May 3 12:51:28 2001
@@ -4,18 +4,22 @@
if [ "$CONFIG_NET_ETHERNET" = "y" ]; then
mainmenu_option next_comment
comment 'MPC8260 Communication Options'
- bool 'CPM SCC Ethernet' CONFIG_SCC_ENET
+ bool 'CPM SCC Ethernet' CONFIG_SCC_ENET_8260
+ define_bool CONFIG_SCC_ENET $CONFIG_SCC_ENET_8260
if [ "$CONFIG_SCC_ENET" = "y" ]; then
- bool 'Ethernet on SCC1' CONFIG_SCC1_ENET
+ bool 'Ethernet on SCC1' CONFIG_SCC1_ENET_8260
+ define_bool CONFIG_SCC1_ENET $CONFIG_SCC1_ENET_8260
if [ "$CONFIG_SCC1_ENET" != "y" ]; then
- bool 'Ethernet on SCC2' CONFIG_SCC2_ENET
+ bool 'Ethernet on SCC2' CONFIG_SCC2_ENET_8260
+ define_bool CONFIG_SCC2_ENET $CONFIG_SCC2_ENET_8260
fi
fi
#
# CONFIG_FEC_ENET is only used to get netdevices to call our init
# function. Any combination of FCC1,2,3 are supported.
#
- bool 'FCC Ethernet' CONFIG_FEC_ENET
+ bool 'FCC Ethernet' CONFIG_FEC_ENET_8260
+ define_bool CONFIG_FEC_ENET $CONFIG_FEC_ENET_8260
if [ "$CONFIG_FEC_ENET" = "y" ]; then
bool 'Ethernet on FCC1' CONFIG_FCC1_ENET
bool 'Ethernet on FCC2' CONFIG_FCC2_ENET
diff -ur linux-2.4.3-ac14/arch/ppc/8xx_io/Config.in linux/arch/ppc/8xx_io/Config.in
--- linux-2.4.3-ac14/arch/ppc/8xx_io/Config.in Wed Apr 4 00:18:05 2001
+++ linux/arch/ppc/8xx_io/Config.in Thu May 3 13:00:29 2001
@@ -5,14 +5,19 @@
comment 'MPC8xx CPM Options'
if [ "$CONFIG_NET_ETHERNET" = "y" ]; then
- bool 'CPM SCC Ethernet' CONFIG_SCC_ENET
+ bool 'CPM SCC Ethernet' CONFIG_SCC_ENET_8xx
+ define_bool CONFIG_SCC_ENET $CONFIG_SCC_ENET_8xx
if [ "$CONFIG_SCC_ENET" = "y" ]; then
choice 'SCC used for Ethernet' \
- "SCC1 CONFIG_SCC1_ENET \
- SCC2 CONFIG_SCC2_ENET \
- SCC3 CONFIG_SCC3_ENET" SCC1
+ "SCC1 CONFIG_SCC1_ENET_8xx \
+ SCC2 CONFIG_SCC2_ENET_8xx \
+ SCC3 CONFIG_SCC3_ENET_8xx" SCC1
+ define_bool CONFIG_SCC1_ENET $CONFIG_SCC1_ENET_8xx
+ define_bool CONFIG_SCC2_ENET $CONFIG_SCC2_ENET_8xx
+ define_bool CONFIG_SCC3_ENET $CONFIG_SCC3_ENET_8xx
fi
- bool '860T FEC Ethernet' CONFIG_FEC_ENET
+ bool '860T FEC Ethernet' CONFIG_FEC_ENET_8xx
+ define_bool CONFIG_FEC_ENET $CONFIG_FEC_ENET_8xx
if [ "$CONFIG_FEC_ENET" = "y" ]; then
bool 'Use MDIO for PHY configuration' CONFIG_USE_MDIO
fi
diff -ur linux-2.4.3-ac14/arch/ppc/config.in linux/arch/ppc/config.in
--- linux-2.4.3-ac14/arch/ppc/config.in Sun Apr 22 14:48:28 2001
+++ linux/arch/ppc/config.in Thu May 3 13:03:03 2001
@@ -34,6 +34,8 @@
if [ "$CONFIG_6xx" = "y" ]; then
bool 'MPC8260 CPM Support' CONFIG_8260
+else
+ define_bool CONFIG_8260 n
fi
if [ "$CONFIG_POWER3" = "y" -o "$CONFIG_POWER4" = "y" ]; then
***********************************************************************
-- ======================================================================= Andrzej M. Krzysztofowicz ankry@mif.pg.gda.pl phone (48)(58) 347 14 61 Faculty of Applied Phys. & Math., Technical University of Gdansk - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon May 07 2001 - 21:00:16 EST