On Thu, 3 May 2001, Mark Hounschell wrote:
> Sorry if this isn't the correct place for this question. Is there or
> will there
> ever be raw tape device access. I'm trying to port an app from Dec unix
> and at
> least there the app requires /dev/rmt** (raw device). I've read in the
> archives
> about how to bind a block device to a raw device using the raw command
> but the
> tape dev (/dev/st*) is a char device and the command doesn't work on
> char devices.
> So I'm trying to figure out to get the same effect as /dev/rmt* does on
> the dec
> box in a linux environment.
You can just use the device /dev/st* (or /dev/nst*). They are raw
(character) devices. If your app needs to find the devices with names
/dev/rmt*, you can make new device nodes or use links.
Kai
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon May 07 2001 - 21:00:18 EST