Hello,
Is it possible to screw up the hardware entirely from software? I made
some changes to the 2.4.2 kernel to support save/restore of the event
counters. It crashed and does not come up at all, what i would like to
know is if there is any way to screw the board from software in such a way
that power off and power on does not bring it up ?.
Its a dual pentium-3 machine. The power supply is gone also, the power
supply from the crashed machine does not bring up another normal computer,
also power supply from normal computer does not bring up crashed computer.
so there must be something really wrong with the motherboard. Id like to
know if it was because of me ..., is it possible to do things to the
motherboard from software (I did change things in the kernel, timer ISR
also), that wont boot the machine at all when power turned off and then on
?. from aboce is it very likely that the power supply went out and took
the board with it ??
and by "doesnt come up" i meant, totally blank, no output at all
absolutely
*Any* help/comments please!
Praveen C
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon May 07 2001 - 21:00:24 EST