Alan Cox wrote:
> > May 22 21:45:07 pollux kernel: ALI15X3: simplex device: DMA disabled
> > May 22 21:45:07 pollux kernel: ide0: ALI15X3 Bus-Master DMA disabled
> > (BIOS)
> > May 22 21:45:07 pollux kernel: ALI15X3: simplex device: DMA disabled
> > May 22 21:45:07 pollux kernel: ide1: ALI15X3 Bus-Master DMA disabled
>
> The DMA was off because the BIOS left it off.
I just checked, and the BIOS auto-detect page for that drive shows PIO Mode 4
and Ultra DMA Mode 5. The BIOS also shows a summary chart during boot, just
before the LILO prompt, and that summary also reports UDMA 5 for that drive. It
really looks like the kernel is not getting the correct device info from the
BIOS.
As I mentioned earlier, the A7A266 supposedly has an ALi M1535D+ southbridge
"with PCI Super-I/O Integrated Peripheral Controller (PSIPC)", rather than the
ALI15X3 reported by the kernel.
Thanks,
Bobby Bryant
Austin, Texas
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu May 31 2001 - 21:00:41 EST