Daniel:
Have you tried swapping in a different stick of RAM and/or running a
boot-time memory tester? Does it boot on 2.2 or any other OSs?
I had a problem like this once before - turned out one of the two 128MB CAS2
modules were bad. I replaced it and 2.4 booted wonderfully.
Good Luck,
- Dave
dave@codewhore.org
----- Original Message -----
From: "Daniel Fraley" <the_toastman@aristotle.net>
To: <linux-kernel@vger.kernel.org>
Sent: Sunday, June 24, 2001 2:51 PM
Subject: Crash on boot (2.4.5)
> Hi, everyone.. I'm borrowing my roommate's email, so please send replies
to
> andyw@edafio.com. Thanks!
>
> Here's my problem... when I boot anything 2.4, I get several oopsen in a
> row, all of which are either (most commonly) kernel paging request could
not
> be handled, or (much less common) unable to handle kernel Null pointer
> dereference. I will send any info on request, but here's my hardware and
> kernel config:
>
> iWill KKR-266R (Via 8363 Northbridge, 686B south)
> AMD tbird 1GHz
> 256MB cas2 pc133 sdram
> ATI Radeon DDR 64MB VIVO
> Kingston KNE120TX (Realtek 8139 chip)
> SBLive! 5.1
> IBM GXP75 30GB (on the via ide controller)
> Pioneer 16x dvd
> ls120
>
> This happens regardless if I turn on swap or not. When swap is on, it is
a
> 128MB partition (and yes, I'm aware of the recommendation of 2x RAM, but I
> believe I read somewhere that someone was working on that, and I didn't
want
> to waste the extra 384MB on swap).
>
> Is there anything I can do to fix this?
>
> -- andyw
>
> p.s., booting with devfs=nomount is better, but still causes oopsen (I get
> to a login prompt, but if I do much more than mount a disk a copy to it,
the
> system freaks)
>
>
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Jun 30 2001 - 21:00:09 EST