1-systeme hangs when i try ton compile anything
i've compiled the kernel 2.4.4 , once i finish and boot the first time on
2.4.4 everything goses ok ,
only too problemes
1st- klogd takes 100% CPU time
2nd- cat /proc/cpuinf --guives me too CPU'S without putin any info about
the CPU 1
like that approximatively
--------------------------------------------
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 498.672
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 mmx fxsr sse
bogomips : 992.87
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name :
stepping : 3
cpu MHz :
cache size :
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 3
wp : yes
flags :
bogomips :
--------------------------------------------
at the second boot it detects correctly CPU0 and CPU1
cat /proc/cpuinfo -->
-------------------------------------------
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 498.672
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov
pat pse36 mmx fxsr sse
bogomips : 992.87
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 498.672
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 3
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov
pat pse36 mmx fxsr sse
bogomips : 996.14
----------------------------------------
cat /proc/version -->
----------------------------------------
Linux version 2.4.4 (root@seraka) (gcc version 2.95.3 20010315 (release)) #2
SMP Thu Jun 28 07:04:06 CEST 2001
----------------------------------------
cat /proc/modules --> nothing cause im no using modules
----------------------------------------
cat /proc/ioports
-------------------------------0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
02f8-02ff : serial(auto)
03c0-03df : vga+
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
4000-403f : Intel Corporation 82371AB PIIX4 ACPI
5000-501f : Intel Corporation 82371AB PIIX4 ACPI
d000-dfff : PCI Bus #01
e000-e01f : Intel Corporation 82371AB PIIX4 USB
e400-e4ff : Adaptec 7892A00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000cc000-000d25ff : Extension ROM
000d3000-000d87ff : Extension ROM
000f0000-000fffff : System ROM
00100000-0ffeffff : System RAM
00100000-00245892 : Kernel code
00245893-002ca41f : Kernel data
0fff0000-0fff2fff : ACPI Non-volatile Storage
0fff3000-0fffffff : ACPI Tables
d8000000-dbffffff : Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge
dc000000-dfffffff : PCI Bus #01
dc000000-dc003fff : Matrox Graphics, Inc. MGA G400 AGP
dd000000-dd7fffff : Matrox Graphics, Inc. MGA G400 AGP
e0000000-e1ffffff : PCI Bus #01
e0000000-e1ffffff : Matrox Graphics, Inc. MGA G400 AGP
e5000000-e5007fff : Yamaha Corporation YMF-724
e5008000-e5008fff : Adaptec AHA-2940U2/W
e5008000-e5008fff : aic7xxx
e5009000-e5009fff : Adaptec 7892A
e5009000-e5009fff : aic7xxx
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ffff0000-ffffffff : reserved
------------------------------------------------
e800-e8ff : Adaptec AHA-2940U2/W
ec00-ec1f : 3Com Corporation 3c595 100BaseTX [Vortex]
ec00-ec1f : eth0
f000-f00f : Intel Corporation 82371AB PIIX4 IDE
-----------------------
cat /proc/iomem --->00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000cc000-000d25ff : Extension ROM
000d3000-000d87ff : Extension ROM
000f0000-000fffff : System ROM
00100000-0ffeffff : System RAM
00100000-00245892 : Kernel code
00245893-002ca41f : Kernel data
0fff0000-0fff2fff : ACPI Non-volatile Storage
0fff3000-0fffffff : ACPI Tables
d8000000-dbffffff : Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge
dc000000-dfffffff : PCI Bus #01
dc000000-dc003fff : Matrox Graphics, Inc. MGA G400 AGP
dd000000-dd7fffff : Matrox Graphics, Inc. MGA G400 AGP
e0000000-e1ffffff : PCI Bus #01
e0000000-e1ffffff : Matrox Graphics, Inc. MGA G400 AGP
e5000000-e5007fff : Yamaha Corporation YMF-724
e5008000-e5008fff : Adaptec AHA-2940U2/W
e5008000-e5008fff : aic7xxx
e5009000-e5009fff : Adaptec 7892A
e5009000-e5009fff : aic7xxx
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ffff0000-ffffffff : reserved
----------------------------------------------
lspci -vvv --->
Expansion ROM at e2000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.0 SCSI storage controller: Adaptec AHA-2940U2/W
Subsystem: Adaptec: Unknown device a180
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (9750ns min, 6250ns max), cache line size 08
Interrupt: pin A routed to IRQ 17
BIST result: 00
Region 0: I/O ports at e800 [disabled] [size=256]
Region 1: Memory at e5008000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at e3000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 Ethernet controller: 3Com Corporation 3c595 100BaseTX [Vortex]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (750ns min, 2000ns max)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at ec00 [size=32]
Expansion ROM at e4000000 [disabled] [size=64K]
00:0c.0 Multimedia audio controller: Yamaha Corporation YMF-724 (rev 05)
Subsystem: Yamaha Corporation YMF724-Based PCI Audio Adapter
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1250ns min, 6250ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e5000000 (32-bit, non-prefetchable) [size=32K]
Capabilities: [50] Power Management version 1
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev
82) (prog-if 00 [VGA])
Subsystem: Matrox Graphics, Inc.: Unknown device 0641
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (4000ns min, 8000ns max), cache line size 08
Interrupt: pin A routed to IRQ 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=32M]
Region 1: Memory at dc000000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at dd000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [f0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=31 SBA+ AGP+ 64bit- FW- Rate=x1
-----------------------------------------------------
cat /proc/scsi/scsi -->
-----------------------------------------------------
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: IBM Model: DDYS-T18350M Rev: S93D
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 01 Lun: 00
Vendor: COMPAQ Model: HB00931B93 Rev: A195
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 02 Lun: 00
Vendor: PLEXTOR Model: CD-ROM PX-32TS Rev: 1.03
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 03 Lun: 00
Vendor: PLEXTOR Model: CD-R PX-R820T Rev: 1.06
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 04 Lun: 00
Vendor: COMPAQ Model: HB00931B93 Rev: A195
Type: Direct-Access ANSI SCSI revision: 02
----------------------------------------------------
my motherboard is an Gigabyte GA-6BXD with f3 bios and my memory is 256 ECC
,
so perhaps the defucnt is caused by the second CPU "CPU1" cause i hade somme
probles with is ,
thank's for helping me caus i start to disespaire "sorry for my poor
english"
and i don't wana use Miscosoft
with regards
---------------------------------------------------
please answer me @ battata.chafik@noos.fr thanks
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Jun 30 2001 - 21:00:20 EST