Hi Daniela,
On Mon, Jul 30, 2001 at 08:04:54AM +0200, Daniela Engert wrote:
> On Sun, 29 Jul 2001 22:28:30 +0200, Kurt Garloff wrote:
>
> >Me neither. I was hoping that only a bit differs. Unfortunately that's not
> >the case, so I need to have a look in the datasheet.
> >But those are not publically available :-(
> >Anybody having them?
>
> Try to get a clue yourself from the WPCREDIT KT133 plugin (see below,
> stripped down to the differing registers). Some differences look
> suspicious to me...
Hey thanks!
> [54:6]=Probe Next Tag State T1 0=disable 1=enable
Main suspect. (Should be 0)
> [54:0]=Fast Write-to-Read 0=disable 1=enable
Third candidate. (Should be 0)
> [68:4]=DRAM Data Latch Delay 0=Latch 1=Delay latch
Second candidate (Should be 1)
> [68:2]=Burst Refresh(4 times) 0=disable 1=enable
Fourth candidate (Should be 0?)
> [6B:5]=Fast Read to Write t-a 0=disable 1=enable
Should this one match 54:0 (third candidate)?
> [6B:1]=Virtual Channel-DRAM 0=disable 1=enable
Strange, why does this one differ between the configs.
OK, I'll come up with a kernel patches (driver/pci/quirks ...)
for people to test.
Regards,
-- Kurt Garloff <garloff@suse.de> Eindhoven, NL GPG key: See mail header, key servers Linux kernel development SuSE GmbH, Nuernberg, DE SCSI, Security
This archive was generated by hypermail 2b29 : Tue Jul 31 2001 - 21:00:43 EST