I have the emu10k1 support compiled as a module for 2.4.9. When I use
the sound card, I have to adjust the volume or open the mixer for the
sound to actually start. As soon as that program stops using the sound
card, the sound is turned off again. It's not the volume level that
changes, but actually the sound is disabled or muted.
I have the following in /etc/modules.conf (as configured by 'sndconfig'
in RedHat 7.1):
alias sound-slot-0 emu10k1
post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L \
>/dev/null 2>&1 || :
pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S \
>/dev/null 2>&1 || :
lspci -v shows:
00:0d.0 Multimedia audio controller: Creative Labs SB Live! EMU10000
(rev 07)
Subsystem: Creative Labs CT4832 SBLive! Value
Flags: bus master, medium devsel, latency 64, IRQ 9
I/O ports at b400 [size=32]
Capabilities: [dc] Power Management version 1
lsmod shows:
emu10k1 49648 1
ac97_codec 8928 0 [emu10k1]
soundcore 4144 4 (autoclean) [emu10k1]
If I use the latest ALSA driver, everything works fine (although I don't
think the sound quality is as good).
System: ASUS A7A266, AMD T-Bird 1.2/266, 256MB Crucial DDR, Intel EEPro
10/100 PCI, Matrox G400 AGP
Is is anybody else experiencing this problem?
Any assistance is appreciated.
Thanks,
Mike.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Aug 23 2001 - 21:00:43 EST