hello all,
my shiny new cdrw hangs the system when i try to burn a cdrom. i've got a
a completely IDE system. hda and hdb are hard drives while hdc is a
standard cdrom and hdd is a cdrw.
while burning cdrecord writes a couple of tracks and then the whole system
freezes [i need to hard power off]. i can blank cdrw's in the drive just
fine, however. i'm running 2.4.9-ac10 SMP [on a single-proc system] and
all partitions are ext3. ide-scsi is loaded as a module at boot.
here's what /var/log/messages shows:
Sep 14 21:12:45 sanfrancisco kernel: scsi : aborting command due to
timeout : pid 0, scsi0, channel 0, id 1, lun 0 0x00 00 00 00 00 00
Sep 14 21:12:54 sanfrancisco kernel: Device not ready. Make sure there is
a disc in the drive.
Sep 14 21:12:55 sanfrancisco last message repeated 2 times
Sep 14 21:13:20 sanfrancisco kernel: hdb: timeout waiting for DMA
Sep 14 21:13:20 sanfrancisco kernel: ide_dmaproc: chipset supported
ide_dma_timeout func only: 14
Sep 14 21:13:26 sanfrancisco kernel: scsi : aborting command due to
timeout : pid 0, scsi0, channel 0, id 1, lun 0 0x43 00 00 00 00 00 00 00
0c 00
Sep 14 21:13:37 sanfrancisco kernel: scsi : aborting command due to
timeout : pid 0, scsi0, channel 0, id 0, lun 0 0x2a 00 00 00 05 92 00 00
1f 00
Sep 14 21:13:37 sanfrancisco kernel: hdc: timeout waiting for DMA
Sep 14 21:13:37 sanfrancisco kernel: ide_dmaproc: chipset supported
ide_dma_timeout func only: 14
Sep 14 21:13:37 sanfrancisco kernel: hdd: status timeout: status=0xd8 {
Busy }
Sep 14 21:13:37 sanfrancisco kernel: hdd: DMA disabled
Sep 14 21:13:37 sanfrancisco kernel: hdd: drive not ready for command
Sep 14 21:13:41 sanfrancisco kernel: hdd: ATAPI reset complete
Sep 14 21:13:41 sanfrancisco kernel: hdd: irq timeout: status=0xd0 { Busy
}
Sep 14 21:13:42 sanfrancisco kernel: hdd: ATAPI reset complete
Sep 14 21:13:42 sanfrancisco kernel: hdd: irq timeout: status=0x80 { Busy
}
Sep 14 21:13:42 sanfrancisco kernel: scsi0 channel 0 : resetting for
second half of retries.
Sep 14 21:13:42 sanfrancisco kernel: SCSI bus is being reset for host 0
channel 0.
any guesses?
thanks!
joe
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Sep 15 2001 - 21:00:50 EST