Re: disregard: Re: ide zip 100 won't mount

From: Peter Wächtler (pwaechtler@loewe-komp.de)
Date: Tue Sep 18 2001 - 06:59:08 EST


Sam Varshavchik wrote:
>
> Joseph Cheek writes:
>
> > hmm, i went into windows *one more time* just to make sure it was still
> > working, and not a hardware problem. well... looks like it doesn't work
> > in windows either. must be hardware.
> >
> > funny thing it shows up in dmesg and in "My Computer", just can't read
> > from it.
>
> That's pretty much what the sense codes below did indicate - media problem.
> Try a different disk.
>

I had the same problem. The second media works, the first got
screwed up? I can't reproduce the problem now.

The media gets destroyed after partitioning and running mke2fs.
I can't believe it myself - but have no other explanation.

When the media was broken I got:
<7>VFS: Disk change detected on device ide0(3,64)
<6> /dev/ide/host0/bus0/target1/lun0:<7>LDM: DEBUG (ldm.c, 877):
 validate_partition_table: Found basic MS-DOS partition, not a dynamic
disk.
<4> p1 p2 p3 p4
<7>VFS: Disk change detected on device ide0(3,65)
<6> /dev/ide/host0/bus0/target1/lun0:<7>LDM: DEBUG (ldm.c, 877):
 validate_partition_table: Found basic MS-DOS partition, not a dynamic
disk.
<4> p1 p2 p3 p4
[and so on with funny device numbers up to 3,93]

cat /proc/partitions
   3 64 98288 ide/host0/bus0/target1/lun0/disc
   3 65 272218546 ide/host0/bus0/target1/lun0/part1
   3 66 269488144 ide/host0/bus0/target1/lun0/part2
   3 67 699181456 ide/host0/bus0/target1/lun0/part3
   3 68 10668 ide/host0/bus0/target1/lun0/part4

Note: a new media has NO partition - it's a floppy.
Now is it possible that the media gets destroyed if the hardware
tries to seek to illegal positions?

> > Joseph Cheek wrote:
> >
> >> i've tried 2.4.7-ac10 and 2.4.9-ac10. same results. at boot i get:
> >>
> >> Sep 17 11:02:48 seattle kernel: ide-floppy driver 0.97.sv
> >> Sep 17 11:02:48 seattle kernel: hdd: No disk in drive
> >> Sep 17 11:02:48 seattle kernel: hdd: 98304kB, 96/64/32 CHS, 4096 kBps,
> >> 512
> >> sector size, 2941 rpm
> >>
> >> looks good, right? but i put a disk in and i get:
> >>
> >> Sep 17 14:36:23 seattle kernel: ide-floppy: hdd: I/O error, pc = 0, key
> >> =
> >> 2, asc = 30, ascq = 0
> >> Sep 17 14:36:23 seattle kernel: ide-floppy: hdd: I/O error, pc = 1b, key
> >> =
> >> 2, asc = 30, ascq = 0
> >> Sep 17 14:36:23 seattle kernel: hdd: No disk in drive
> >>
> >> not hardware, as it works in windows on the same machine.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sun Sep 23 2001 - 21:00:25 EST