> > eth0: RealTek RTL-8029 found at 0xe000, IRQ 10, 00:00:B4:B6:73:BC.
>
> > spurious 8259A interrupt: IRQ7.
> > NETDEV WATCHDOG: eth0: transmit timed out
> > eth0: Tx timed out, cable problem? TSR=0x16, ISR=0x0, t=26.
> > NETDEV WATCHDOG: eth0: transmit timed out
> > eth0: Tx timed out, cable problem? TSR=0x16, ISR=0x0, t=23.
>
> apparently interrupt 10 got lost and was delivered as a spurious
> interrupt. This can be the result of out-of-spec hardware. (card or
> board.)
One moment, I haven't read the mail not totaly. My network card has IRQ
10 and the 'spurious 8259A interrupt' is about IRQ 7. Why should the IRQ
change ? And with the 2.4.9 kernel I have also
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Tx timed out, cable problem? TSR=0x16, ISR=0x0, t=24.
...
but none 'spurious 8259A interrupt: IRQ7.'
I don't think these 2 messages aren't related to eachother, isn't it a
coincidence that they are comming after eachother ?
Alfred
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Sep 30 2001 - 21:00:50 EST