On Sep 26, 2001 15:29 -0600, adilger wrote:
> On Wed, 26 Sep 2001, Ingo Molnar wrote:
> > sample startup of the netconsole on the server:
> >
> > insmod netconsole dev=eth1 target_ip=0x0a000701 \
> > source_port=6666 \
> > target_port=6666 \
> > target_eth_byte0=0x00 \
> > target_eth_byte1=0x90\
> > target_eth_byte2=0x27 \
> > target_eth_byte3=0x8C \
> > target_eth_byte4=0xA0 \
> > target_eth_byte5=0xA8
>
> Ugh. Maybe a wrapper script (netconsole-server) which automates this is
> in order? I imagine the eth_byteX is a MAC address (or at least that this
> is in the documentation)?
Ok, I read the docs, and this is indeed a target MAC address. It may still
be easier to accept a regular MAC address like target_mac=XX:XX:XX:XX:XX:XX
as the module parameter (and a target_ip=A.B.C.D). In any case, here is a
script to automate this (ugly because of the conversions needed).
=========================================================================
#!/bin/sh
prog=netconsole-server
#
# initialize the netconsole using reasonable defaults (normally just the
# client IP address, and possibly the port. We can determine the MAC
# address of the client system, IP address, the correct device, and verify
# that we are using an ethernet interface (required for netconsole to work).
#
# Andreas Dilger <adilger@turbolinux.com> Sep 26, 2001
usage()
{
cat - <<- EOF 1>&2
Initialize a network message console over UDP.
usage: $prog [-b] [-d dev] [-m mac] [-p port] target[:port]
-b - use broadcast ethernet MAC address
-m - specify remote system MAC address (default: detect)
-p - local port to use for message traffic (default: 6666)
-d - ethernet device to use for messages (default: detect)
target - hostname/IP address of remote netconsole-client
:port - port on target netconsole-client (default: like -p)
EOF
exit 1
}
PATH=$PATH:/sbin:/usr/sbin
PORT=6666
while [ $# -ge 1 ]; do case $1 in
-b) NOMAC=1 ;;
-d) DEV=$2; shift ;;
-m) MAC=$2; shift ;;
-p) PORT=$2; shift ;;
*:*) TGT=`echo $1 | sed "s/:.*//"`; TPORT=`echo $1 | sed "s/.*://"` ;;
*) TGT=$1 ;;
esac
shift
done
[ -z "$TGT" ] && usage
[ -z "$TPORT" ] && TPORT=$PORT
ping -c 1 $TGT > /dev/null 2>&1
[ $? -ne 0 ] && echo "$prog: can't ping $TGT" 1>&2 && usage
dquad_to_hex()
{
echo $1 | sed -e "s/[()]//g" -e "s/\./ /g" | while read I0 I1 I2 I3 ; do
printf "0x%02X%02X%02X%02X" $I0 $I1 $I2 $I3
done
}
# output from arp -a of the form:
# good: host.domain (A.B.C.D) at 00:50:BF:06:48:C1 [ether] on eth0
# bad: ? (A.B.C.D) at <incomplete> on eth0
arp -a | grep $TGT | { read HOSTNAME IPADDR AT MACADDR TYPE ON IFACE;
[ "$HOSTNAME" = "?" -a -z "$MAC" -a -z "$NOMAC" ] && \
echo "$prog: can't resolve $TGT MAC" 1>&2 && usage
[ -z "$MAC" ] && MAC=$MACADDR
[ -z "$DEV" ] && DEV=$IFACE
[ "$DEV" = "$IFACE" -a "$TYPE" != "[ether]" ] && \
echo "$prog: $DEV must be an ethernet interface" 1>&2 && usage
IPHEX=`dquad_to_hex $IPADDR`
echo $MAC | sed "s/:/ /g" | { read M0 M1 M2 M3 M4 M5;
if [ -z "$NOMAC" ]; then
TGTMAC="target_eth_byte0=0x$M0 target_eth_byte1=0x$M1 \
target_eth_byte2=0x$M2 target_eth_byte3=0x$M3 \
target_eth_byte4=0x$M4 target_eth_byte5=0x$M5"
fi
#insmod netconsole dev=$DEV target_ip=$IPHEX \
echo dev=$DEV target_ip=$IPHEX \
source_port=$PORT target_port=$TPORT $TGTMAC
}
}
Cheers, Andreas
--
Andreas Dilger \ "If a man ate a pound of pasta and a pound of antipasto,
\ would they cancel out, leaving him still hungry?"
http://www-mddsp.enel.ucalgary.ca/People/adilger/ -- Dogbert
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Sep 30 2001 - 21:00:52 EST