Hi,
i've got a problem on our new SMP machine with IDE-Raid and kernel 2.4.9
that's giving me a terrible headache.
Our configuration:
2 WD drives in the raid1 array
1 Maxtor drive on normal ide
mystery #1:
I can mount a ext2 filesystem twice without any errors. The two filesystems
contain different data and changes to the second mount don't affect the
first mount. Strange!
Here is a snippet from console with /dev/sda5 mounted twice:
/dev/sda5 / ext2 rw,usrquota,grpquota 0 0
none /proc proc rw 0 0
/dev/sda7 /opt/root ext2 rw,usrquota,grpquota 0 0
/dev/sda6 /var ext2 rw,usrquota,grpquota 0 0
/dev/sda1 /boot ext2 rw 0 0
none /dev/pts devpts rw,gid=5,mode=620 0 0
/dev/sda5 /mnt ext2 rw 0 0
a strace on the mount command shows that the syscall mount is executed w/o
error.
mount("/dev/sda5", "/mnt/", "ext2", 0xc0ed0000, 0) = 0
As far as i know it should return EBUSY on a fs that is already mounted.
Second mystery:
the mounted /dev/hda3 contains the same data as /dev/sda5 and changes to one
of them affect both partitions.
I'm not sure wether this is a kernel issue or a escalade firmware issue but
perhaps one of you had that problem too and knows a solution.
Thank you
andreas
-- e-admin internet gmbh Andreas Gietl Roter-Brach-Weg 124a tel +49 941 3810884 fax +49 941 3810891 mobil +49 171 6070008 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Oct 15 2001 - 21:00:55 EST