Sorry everyone I've upset.
The problem *seems* to be with my hard disks. Apparently both advertises
udma2 capability but neither is capable?? When I run the disks on my
"on-board" controller, I get a DMA timeout and the system comes to a halt
(well only the HD activity, but you can't do much without access to the
root/usr partition). When running on my HPT366 controller, I don't get the
timeouts, but I do get the "slow responding system" at about the same time
at which I get the timeouts on the PIIX4 controller. Problem comes when
having copied about 11% of a 500'000'000 byte file from /dev/hdc7 to
/dev/hda6...
The hard disks in question are models
hda: ST36451A
hdc: Maxtor 91152D8
The reason why I moved to the HPT366 controller in the first place, was
because the onboard controller / BIOS? messed up the C/H/S values on one of
the hard disks. Cannot be 100% sure though as this was a while ago (two
years?).
_____________________________________________________
| Martin Eriksson <nitrax@giron.wox.org>
| MSc CSE student, department of Computing Science
| Umeå University, Sweden
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Nov 30 2001 - 21:00:16 EST