Alan Cox wrote:
>
> > The later card, Davicom, is probably not a well-known card, but
> > nevertheless, it works like shit in Linux. I am using Redhat 7.1 and th=
> > e
> > kernel 2.4.2-2. If I send more than 10M to such a card in an interval o=
>
> Davicom is a bad tulip clone. It has a (not very good) davicom provided
> driver in 2.4.2 or you can use tulip or the updated davicom provided dfme
> driver in newer 2.4
tulip should work better IMHO for all davicom tulip clones -except- the
older ones which require doing a software crc for each packet. For
those, the performance penalty is too high to integrate into the
mainline tulip driver. So my advice is usually "try tulip, then
fallback to dmfe if software crc is required"
-- Jeff Garzik | Only so many songs can be sung Building 1024 | with two lips, two lungs, and one tongue. MandrakeSoft | - nomeansno- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Nov 30 2001 - 21:00:23 EST