> Date: Tue, 27 Nov 2001 09:35:40 +0900
> From: nakai <nakai@neo.shinko.co.jp>
>
> Would you try 2.4.2 ?
No dice. It fails pretty spectacularly:
Nov 26 21:29:47 jik kernel: hde: timeout waiting for DMA
Nov 26 21:29:47 jik kernel: ide_dmaproc: chipset supported ide_dma_timeout func only: 14
Nov 26 21:29:47 jik kernel: hde: irq timeout: status=0x50 { DriveReady SeekComplete }
Nov 26 21:29:48 jik kernel: hdg: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Nov 26 21:29:48 jik kernel: hdg: dma_intr: error=0x04 { DriveStatusError }
Nov 26 21:29:50 jik kernel: hde: dma_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
Nov 26 21:29:50 jik kernel: hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
Nov 26 21:29:50 jik kernel: hdg: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Nov 26 21:29:50 jik kernel: hdg: dma_intr: error=0x04 { DriveStatusError }
Nov 26 21:29:50 jik kernel: attempt to access beyond end of device
Nov 26 21:29:50 jik kernel: 22:01: rw=0, want=1101324772, limit=7502323
[lots more of lines like the last two]
Nov 26 21:29:52 jik kernel: hde: dma_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
Nov 26 21:29:52 jik kernel: hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
Nov 26 21:29:52 jik kernel: hde: dma_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
Nov 26 21:29:52 jik kernel: hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
Nov 26 21:29:52 jik kernel: ide2: reset: success
With Mark Hahn's guidance, I have learned the following additional
information about these problems:
* It only occurs when I use an SMP kernel (I have two processors).
With the uniprocessor kernel (i.e., letting my second processor sit
idle), there are no disk errors.
* Changing the BIOS settings from MPS 1.4 to MPS 1.1 reduces the
frequenty of, but does not completely eliminate, the problems.
Furthermore, I happened to have a SIIG Ultra ATA/66 controller lying
around, so I decided to see what would happen if I used it instead of
the Promise controller. I rebuilt my 2.4.16 kernel with HPT366,
swapped the controllers and rebooted, and the problems persist with
the SIIG controller.
On the other hand, at least while the SIIG controller is working, it
seems to be much faster than the Promise controller, so I think I'll
leave it in and switch back to 2.2.19+IDE for the time being :-).
Thanks,
Jonathan Kamens
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Nov 30 2001 - 21:00:26 EST