On Tue, Nov 13, 2001 at 11:04:57AM +0000, Alan Cox wrote:
> > I am having problems with both UDMA and Multiword DMA. The problem doesn't
> > go away unless I disable CONFIG_IDEDMA_PCI_AUTO.
> >
> > I don't know if there is actual FS corruption with MWord DMA, but there is
> > definitely a "hang" for a few seconds accompanied by a DMA error.
>
> I've no other reports from MWDMA other than the usual "CDROM that doesnt
> handle DMA" things
ops01:~# hdparm -Ii /dev/hda
/dev/hda:
Model=IBM-DTLA-307075, FwRev=TXAOA50C, SerialNo=YSDYSG5S166
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=40
BuffType=3(DualPortCache), BuffSize=1916kB, MaxMultSect=16, MultSect=16
DblWordIO=no, OldPIO=2, DMA=yes, OldDMA=2
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=150136560
tDMA={min:120,rec:120}, DMA modes: mword0 mword1 *mword2
IORDY=on/off, tPIO={min:240,w/IORDY:120}, PIO modes: mode3 mode4
UDMA modes: mode0 mode1 mode2 mode3 mode4 mode5
Model=BI-MTDAL3-7070 5 , FwRev=XTOA5AC0,
SerialNo= Y DSSY5G1S66
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=40
BuffType=3(DualPortCache), BuffSize=1916kB, MaxMultSect=16, MultSect=16
DblWordIO=no, OldPIO=2, DMA=yes, OldDMA=2
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=150136560
tDMA={min:120,rec:120}, DMA modes: mword0 mword1 *mword2
IORDY=on/off, tPIO={min:240,w/IORDY:120}, PIO modes: mode3 mode4
UDMA modes: mode0 mode1 mode2 mode3 mode4 mode5
ops01:~# hdparm -Ii /dev/hdb
/dev/hdb:
Model=Maxtor 4W100H6, FwRev=AAH01310, SerialNo=W6H2JCRC
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=3(DualPortCache), BuffSize=2048kB, MaxMultSect=16, MultSect=16
DblWordIO=no, OldPIO=2, DMA=yes, OldDMA=0
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=195711264
tDMA={min:120,rec:120}, DMA modes: mword0 mword1 *mword2
IORDY=on/off, tPIO={min:120,w/IORDY:120}, PIO modes: mode3 mode4
UDMA modes: mode0 mode1 mode2 mode3 mode4 mode5
Model=aMtxro4 1W006H , FwRev=AA0H3101,
SerialNo=6W2HCJCR
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=3(DualPortCache), BuffSize=2048kB, MaxMultSect=16, MultSect=16
DblWordIO=no, OldPIO=2, DMA=yes, OldDMA=0
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=195711264
tDMA={min:120,rec:120}, DMA modes: mword0 mword1 *mword2
IORDY=on/off, tPIO={min:120,w/IORDY:120}, PIO modes: mode3 mode4
UDMA modes: mode0 mode1 mode2 mode3 mode4 mode5
Here is a sample of the I/O errors:
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: error=0x40 { UncorrectableError }, LBAsect=15220172,
sector=1548794
end_request: I/O error, dev 03:05 (hda), sector 1548794
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: error=0x40 { UncorrectableError }, LBAsect=15220173,
sector=1548795
end_request: I/O error, dev 03:05 (hda), sector 1548795
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: error=0x40 { UncorrectableError }, LBAsect=15220174,
sector=1548796
end_request: I/O error, dev 03:05 (hda), sector 1548796
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: error=0x40 { UncorrectableError }, LBAsect=15220175,
sector=1548797
end_request: I/O error, dev 03:05 (hda), sector 1548797
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: error=0x40 { UncorrectableError }, LBAsect=15220176,
sector=1548798
end_request: I/O error, dev 03:05 (hda), sector 1548798
--Adam
-- Adam McKenna <adam@flounder.net> | GPG: 17A4 11F7 5E7E C2E7 08AA http://flounder.net/publickey.html | 38B0 05D0 8BF7 2C6D 110A - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Nov 30 2001 - 21:00:26 EST