I strongly suggest you execute the extend tests in the smart-suite
authored by a friend of mine that I have listed on my www.linux-ide.org.
What you have done is trigger a process to have the device go into a
selftest mode to perform a block test. I would tell you more but I may
have exposed myself already.
Regards, you need to execute an extend smart offline test.
Also be sure to query the smart logs.
Respectfully,
Andre Hedrick
CEO/President, LAD Storage Consulting Group
Linux ATA Development
Linux Disk Certification Project
On Tue, 27 Nov 2001, Wayne Whitney wrote:
> In mailing-lists.linux-kernel, Andre Hedrick wrote:
>
> > By the time an ATA device gets to generating this message, either the bad
> > block list is full or all reallocation sectors are used. Unlike SCSI
> > which has to be hand held, 90% of all errors are handle by the device.
>
> Perhaps you or one of the other gurus could explain the following
> observations, which I am sure that I and many other readers would find
> very enlightening:
>
> I have an IBM-DTLA-307045 drive connected to a PDC20265 controller on
> an ia32 machine running 2.4.16. After reading this discussion and
> hearing about the problems that others have had with the IBM 75GXP
> series, I thought that I should test out my drive to see if it is OK.
> So I ran 'dd if=/dev/hde of=/dev/null bs=128k'. Every thing went
> fine, except for about five seconds in the middle, when the disk made
> a lot of grinding sounds and the system was unresponsive. That
> generated the log messages messages appended below.
>
> However, running the dd command again (after a reboot) produced no
> errors. So the drive remapped some bad sectors the first time
> through? The common wisdom here is that once you get to the point
> where the drive reports a bad sector, you are in trouble. If so, why
> did the second dd command work OK? I have had no other problems with
> this drive.
>
> Thanks, Wayne
>
> hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hde: dma_intr: error=0x40 { UncorrectableError }, LBAsect=12939888, sector=12939804
> end_request: I/O error, dev 21:00 (hde), sector 12939804
> hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hde: dma_intr: error=0x40 { UncorrectableError }, LBAsect=12939888, sector=12939806
> end_request: I/O error, dev 21:00 (hde), sector 12939806
> hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hde: dma_intr: error=0x40 { UncorrectableError }, LBAsect=12939888, sector=12939808
> end_request: I/O error, dev 21:00 (hde), sector 12939808
> hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hde: dma_intr: error=0x40 { UncorrectableError }, LBAsect=12939888, sector=12939810
> end_request: I/O error, dev 21:00 (hde), sector 12939810
> hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hde: dma_intr: error=0x40 { UncorrectableError }, LBAsect=12939888, sector=12939812
> end_request: I/O error, dev 21:00 (hde), sector 12939812
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Nov 30 2001 - 21:00:29 EST