Hi!
I have installed 2.4.16 kernel. And now I see that possibly my problem
dealed with loop device work when HIGHMEM enabled.
I have tested 2 configuration:
1. HIGHMEM - disable
loop device compiled in kernel
2. HIGHMEM - enable
loop device compiled in kernel
I am using filesystem from a file mounted to /var/log directory during
the boot.File is formated by ext2 filesystem.
like this: mount /tmp/tmpfs /var/log -o loop
For 1 all is working fine.Loop devices is working and no any unresolved
symbols.
For 2 I loop devices is not used because module ext2 have unresolved
symbols:
/lib/modules/2.4.16-hm/kernel/fs/ext2/ext2.o: unresolved symbol kunmap_high
/lib/modules/2.4.16-hm/kernel/fs/ext2/ext2.o: unresolved symbol
highmem_start_page
/lib/modules/2.4.16-hm/kernel/fs/ext2/ext2.o: unresolved symbol kmap_high
/lib/modules/2.4.16-hm/kernel/fs/ext2/ext2.o: insmod
/lib/modules/2.4.16-hm/kernel/fs/ext2/ext2.o failed
/lib/modules/2.4.16-hm/kernel/fs/ext2/ext2.o: insmod ext2 failed
bash-2.05# modprobe rd
/lib/modules/2.4.16-hm/kernel/drivers/block/rd.o: unresolved symbol
kunmap_high
/lib/modules/2.4.16-hm/kernel/drivers/block/rd.o: unresolved symbol
highmem_start_page
/lib/modules/2.4.16-hm/kernel/drivers/block/rd.o: unresolved symbol
kmap_high
/lib/modules/2.4.16-hm/kernel/drivers/block/rd.o: insmod
/lib/modules/2.4.16-hm/kernel/drivers/block/rd.o
failed/lib/modules/2.4.16-hm/kernel/drivers/block/rd.o: insmod rd failed
bash-2.05# modprobe isofs
/lib/modules/2.4.16-hm/kernel/fs/isofs/isofs.o: unresolved symbol
kunmap_high
/lib/modules/2.4.16-hm/kernel/fs/isofs/isofs.o: unresolved symbol
highmem_start_page
/lib/modules/2.4.16-hm/kernel/fs/isofs/isofs.o: unresolved symbol kmap_high
/lib/modules/2.4.16-hm/kernel/fs/isofs/isofs.o: insmod
/lib/modules/2.4.16-hm/kernel/fs/isofs/isofs.o failed
/lib/modules/2.4.16-hm/kernel/fs/isofs/isofs.o: insmod isofs failed
bash-2.05# modprobe minix
/lib/modules/2.4.16-hm/kernel/fs/minix/minix.o: unresolved symbol
kunmap_high
/lib/modules/2.4.16-hm/kernel/fs/minix/minix.o: unresolved symbol
highmem_start_page
/lib/modules/2.4.16-hm/kernel/fs/minix/minix.o: unresolved symbol kmap_high
/lib/modules/2.4.16-hm/kernel/fs/minix/minix.o: insmod
/lib/modules/2.4.16-hm/kernel/fs/minix/minix.o failed
/lib/modules/2.4.16-hm/kernel/fs/minix/minix.o: insmod minix failed
So without loop devices all is working in HIGHMEM configuration.
Sorry for a little flood.
Best regards, pasha.
Previous message content:
The problem is in kernel freezing after some time after booting if I
am turning on HIGHMEM in kernel configuration.This is behaviour when I
dont run syslog and klog deamons during the booting. Otherwise kernel
freezes right after start syslog daemon and gives oops.Without turned on
HIGHMEM system is working normally.
My PC configuration:
HP X4000
Dual P4 Xeon 1.7GHz
MB chipset i860
2G RAM
I have tested 2.4.14 , 2.4.15 , 2.4.10 , 2.4.9 kernels with the same
configuration. And only 2.4.9 kernel is working normally. As I remeber
in 2.4.10 was included new VM system. May be problem is dealed with it?
In attachment dmesg log with oops, decoded oops and kernel
configuration. All is from 2.4.15 kernel test.
I can test patches if it will be necessary. pasha.
Marcelo Tosatti wrote:
> Could you please describe whats your problem with HIGHMEM again?
>
> I did not read your first report.
>
> On Sat, 24 Nov 2001, Pavel Frolov wrote:
>
>
>>Hi, ppl!
>> I have tried to use HIGHMEM on 2.4.15 and 2.4.14 as had written
>>before without success.
>> On 2.4.9 kernel HIGHMEM is working.
>>
>> Please check new VM stuff.
>>
>> pasha.
>>
>>-
>>To unsubscribe from this list: send the line "unsubscribe
linux-kernel" in
>>the body of a message to majordomo@vger.kernel.org
>>More majordomo info at http://vger.kernel.org/majordomo-info.html
>>Please read the FAQ at http://www.tux.org/lkml/
>>
>>
>
>
ksymoops 2.4.3 on i686 2.4.15-greased-turkey. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.15-greased-turkey/ (default)
-m /usr/src/linux/System.map (default)
Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
1150MB HIGHMEM available.
WARNING: unexpected IO-APIC, please mail
cpu: 0, clocks: 997628, slice: 332542
cpu: 1, clocks: 997628, slice: 332542
Unable to handle kernel NULL pointer dereference at virtual address 00000800
Unable to handle kernel NULL pointer dereference at virtual address 00000400
c018dd5e
*pde = 00000000
Oops: 0002
CPU: 0
EIP: 0010:[<c018dd5e>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010206
eax: 00000400 ebx: f77f7800 ecx: 00000100 edx: 00000800
esi: f77f7800 edi: 00000800 ebp: c2edffc0 esp: f77fbf40
ds: 0018 es: 0018 ss: 0018
c018dd5e
*pde = 00000000
Process loop1 (pid: 29, stackpage=f77fb000)
Stack: 00000800 00000400 00000800 c018dfa5 f7bbb11c 00000001 00000800 f77f7800
00000400 00000002 00000008 f7bbb11c f7bd9c00 f7bbb11c 00000c00 00000c00
f7bbb228 00000002 00000400 00000000 f77f7800 c02233c0 f7a08930 f7ab5e80
Call Trace: [<c018dfa5>] [<c018e265>] [<c018e829>] [<c0105594>]
Code: f3 a5 a8 02 74 02 66 a5 a8 01 74 01 a4 31 c0 5b 5e 5f c3 8d
>>EIP; c018dd5e <transfer_none+2e/44> <=====
Trace; c018dfa4 <lo_send+124/1f0>
Trace; c018e264 <do_bh_filebacked+58/94>
Trace; c018e828 <loop_thread+100/224>
Trace; c0105594 <kernel_thread+28/38>
Code; c018dd5e <transfer_none+2e/44>
00000000 <_EIP>:
Code; c018dd5e <transfer_none+2e/44> <=====
0: f3 a5 repz movsl %ds:(%esi),%es:(%edi) <=====
Code; c018dd60 <transfer_none+30/44>
2: a8 02 test $0x2,%al
Code; c018dd62 <transfer_none+32/44>
4: 74 02 je 8 <_EIP+0x8> c018dd66 <transfer_none+36/44>
Code; c018dd64 <transfer_none+34/44>
6: 66 a5 movsw %ds:(%esi),%es:(%edi)
Code; c018dd66 <transfer_none+36/44>
8: a8 01 test $0x1,%al
Code; c018dd68 <transfer_none+38/44>
a: 74 01 je d <_EIP+0xd> c018dd6a <transfer_none+3a/44>
Code; c018dd6a <transfer_none+3a/44>
c: a4 movsb %ds:(%esi),%es:(%edi)
Code; c018dd6a <transfer_none+3a/44>
d: 31 c0 xor %eax,%eax
Code; c018dd6c <transfer_none+3c/44>
f: 5b pop %ebx
Code; c018dd6e <transfer_none+3e/44>
10: 5e pop %esi
Code; c018dd6e <transfer_none+3e/44>
11: 5f pop %edi
Code; c018dd70 <transfer_none+40/44>
12: c3 ret
Code; c018dd70 <transfer_none+40/44>
13: 8d 00 lea (%eax),%eax
Oops: 0002
Unable to handle kernel NULL pointer dereference at virtual address 00000800
c018dd5e
*pde = 00000000
CPU: 1
EIP: 0010:[<c018dd5e>] Not tainted
EFLAGS: 00010206
eax: 00000400 ebx: f77f0400 ecx: 00000100 edx: 00000400
esi: f77f0400 edi: 00000400 ebp: c2edc400 esp: f77f5f40
ds: 0018 es: 0018 ss: 0018
Process loop2 (pid: 34, stackpage=f77f5000)
Stack: 00000400 00000400 00000400 c018dfa5 f7bbb238 00000001 00000400 f77f0400
00000400 00000001 00000008 f7bbb238 f7bd9780 f7bbb238 00000800 00000800
f7bbb344 00000001 00000400 00000000 f77f0400 c02233c0 f7a08530 f7ae2900
Call Trace: [<c018dfa5>] [<c018e265>] [<c018e829>] [<c0105594>]
Code: f3 a5 a8 02 74 02 66 a5 a8 01 74 01 a4 31 c0 5b 5e 5f c3 8d
>>EIP; c018dd5e <transfer_none+2e/44> <=====
Trace; c018dfa4 <lo_send+124/1f0>
Trace; c018e264 <do_bh_filebacked+58/94>
Trace; c018e828 <loop_thread+100/224>
Trace; c0105594 <kernel_thread+28/38>
Code; c018dd5e <transfer_none+2e/44>
00000000 <_EIP>:
Code; c018dd5e <transfer_none+2e/44> <=====
0: f3 a5 repz movsl %ds:(%esi),%es:(%edi) <=====
Code; c018dd60 <transfer_none+30/44>
2: a8 02 test $0x2,%al
Code; c018dd62 <transfer_none+32/44>
4: 74 02 je 8 <_EIP+0x8> c018dd66 <transfer_none+36/44>
Code; c018dd64 <transfer_none+34/44>
6: 66 a5 movsw %ds:(%esi),%es:(%edi)
Code; c018dd66 <transfer_none+36/44>
8: a8 01 test $0x1,%al
Code; c018dd68 <transfer_none+38/44>
a: 74 01 je d <_EIP+0xd> c018dd6a <transfer_none+3a/44>
Code; c018dd6a <transfer_none+3a/44>
c: a4 movsb %ds:(%esi),%es:(%edi)
Code; c018dd6a <transfer_none+3a/44>
d: 31 c0 xor %eax,%eax
Code; c018dd6c <transfer_none+3c/44>
f: 5b pop %ebx
Code; c018dd6e <transfer_none+3e/44>
10: 5e pop %esi
Code; c018dd6e <transfer_none+3e/44>
11: 5f pop %edi
Code; c018dd70 <transfer_none+40/44>
12: c3 ret
Code; c018dd70 <transfer_none+40/44>
13: 8d 00 lea (%eax),%eax
Oops: 0002
CPU: 0
EIP: 0010:[<c018dd5e>] Not tainted
EFLAGS: 00010206
eax: 00000400 ebx: f7a01800 ecx: 00000100 edx: 00000800
esi: f7a01800 edi: 00000800 ebp: c2ff1700 esp: f7a07f40
ds: 0018 es: 0018 ss: 0018
Process loop0 (pid: 23, stackpage=f7a07000)
Stack: 00000800 00000400 00000800 c018dfa5 f7bbb000 00000001 00000800 f7a01800
00000400 00000002 00000008 f7bbb000 f7a00f00 f7bbb000 00000c00 00000c00
f7bbb10c 00000002 00000400 00000000 f7a01800 c02233c0 f7a3ebb0 f7ae2b00
Call Trace: [<c018dfa5>] [<c018e265>] [<c018e829>] [<c0105594>]
Code: f3 a5 a8 02 74 02 66 a5 a8 01 74 01 a4 31 c0 5b 5e 5f c3 8d
>>EIP; c018dd5e <transfer_none+2e/44> <=====
Trace; c018dfa4 <lo_send+124/1f0>
Trace; c018e264 <do_bh_filebacked+58/94>
Trace; c018e828 <loop_thread+100/224>
Trace; c0105594 <kernel_thread+28/38>
Code; c018dd5e <transfer_none+2e/44>
00000000 <_EIP>:
Code; c018dd5e <transfer_none+2e/44> <=====
0: f3 a5 repz movsl %ds:(%esi),%es:(%edi) <=====
Code; c018dd60 <transfer_none+30/44>
2: a8 02 test $0x2,%al
Code; c018dd62 <transfer_none+32/44>
4: 74 02 je 8 <_EIP+0x8> c018dd66 <transfer_none+36/44>
Code; c018dd64 <transfer_none+34/44>
6: 66 a5 movsw %ds:(%esi),%es:(%edi)
Code; c018dd66 <transfer_none+36/44>
8: a8 01 test $0x1,%al
Code; c018dd68 <transfer_none+38/44>
a: 74 01 je d <_EIP+0xd> c018dd6a <transfer_none+3a/44>
Code; c018dd6a <transfer_none+3a/44>
c: a4 movsb %ds:(%esi),%es:(%edi)
Code; c018dd6a <transfer_none+3a/44>
d: 31 c0 xor %eax,%eax
Code; c018dd6c <transfer_none+3c/44>
f: 5b pop %ebx
Code; c018dd6e <transfer_none+3e/44>
10: 5e pop %esi
Code; c018dd6e <transfer_none+3e/44>
11: 5f pop %edi
Code; c018dd70 <transfer_none+40/44>
12: c3 ret
Code; c018dd70 <transfer_none+40/44>
13: 8d 00 lea (%eax),%eax
1 warning issued. Results may not be reliable.
Linux version 2.4.15-greased-turkey (root@pc-3) (gcc version 2.95.3 20010315 (release)) #1 SMP Fri Nov 23 17:06:00 CET 2001
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ea000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fef0000 (usable)
BIOS-e820: 000000007fef0000 - 000000007feff000 (ACPI data)
BIOS-e820: 000000007feff000 - 000000007ff00000 (ACPI NVS)
BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
1150MB HIGHMEM available.
found SMP MP-table at 000f6c20
hm, page 000f6000 reserved twice.
hm, page 000f7000 reserved twice.
hm, page 0009f000 reserved twice.
hm, page 000a0000 reserved twice.
On node 0 totalpages: 524016
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 294640 pages.
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: Product ID: HP_WOMBAT APIC at: 0xFEE00000
Processor #0 Unknown CPU [15:1] APIC version 20
Processor #6 Unknown CPU [15:1] APIC version 20
I/O APIC #1 Version 32 at 0xFEC00000.
I/O APIC #2 Version 32 at 0xFEC80000.
Processors: 2
Kernel command line: nfsroot=192.168.77.1:/cluster, BOOT_IMAGE=vmlinuz-P4 ip=192.168.77.3:192.168.77.1:192.168.77.1:255.255.255.0
Initializing CPU#0
Detected 1695.876 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3381.65 BogoMIPS
Memory: 2060916k/2096064k available (944k kernel code, 34756k reserved, 291k data, 228k init, 1178560k highmem)
Dentry-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Buffer-cache hash table entries: 131072 (order: 7, 524288 bytes)
Page-cache hash table entries: 524288 (order: 9, 2097152 bytes)
CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 12K, L1 D cache: 8K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 12K, L1 D cache: 8K
CPU: L2 cache: 256K
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
CPU0: Intel(R) Xeon(TM) CPU 1.70GHz stepping 02
per-CPU timeslice cutoff: 731.74 usecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/6 eip 2000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 3381.65 BogoMIPS
CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 12K, L1 D cache: 8K
CPU: L2 cache: 256K
Intel machine check reporting enabled on CPU#1.
CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
CPU1: Intel(R) Xeon(TM) CPU 1.70GHz stepping 02
Total of 2 processors activated (6763.31 BogoMIPS).
ENABLING IO-APIC IRQs
Setting 1 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 1 ... ok.
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 1-0, 1-5, 1-10, 1-11, 1-18, 1-20, 1-22, 2-0, 2-1, 2-2, 2-3, 2-4, 2-5, 2-6, 2-7, 2-8, 2-9, 2-10, 2-11, 2-12, 2-13, 2-14, 2-15, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 21.
number of IO-APIC #1 registers: 24.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #1......
.... register #00: 01008000
....... : physical APIC id: 01
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 003 03 0 0 0 0 0 1 1 39
02 003 03 0 0 0 0 0 1 1 31
03 003 03 0 0 0 0 0 1 1 41
04 003 03 0 0 0 0 0 1 1 49
05 000 00 1 0 0 0 0 0 0 00
06 003 03 0 0 0 0 0 1 1 51
07 003 03 0 0 0 0 0 1 1 59
08 003 03 0 0 0 0 0 1 1 61
09 003 03 0 0 0 0 0 1 1 69
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 003 03 0 0 0 0 0 1 1 71
0d 003 03 0 0 0 0 0 1 1 79
0e 003 03 0 0 0 0 0 1 1 81
0f 003 03 0 0 0 0 0 1 1 89
10 003 03 1 1 0 1 0 1 1 91
11 003 03 1 1 0 1 0 1 1 99
12 000 00 1 0 0 0 0 0 0 00
13 003 03 1 1 0 1 0 1 1 A1
14 000 00 1 0 0 0 0 0 0 00
15 003 03 1 1 0 1 0 1 1 A9
16 000 00 1 0 0 0 0 0 0 00
17 003 03 1 1 0 1 0 1 1 B1
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 02000000
....... : arbitration: 02
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ19 -> 0:19
IRQ21 -> 0:21
IRQ23 -> 0:23
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1695.9728 MHz.
..... host bus clock speed is 99.7628 MHz.
cpu: 0, clocks: 997628, slice: 332542
CPU0<T0:997616,T1:665072,D:2,S:332542,C:997628>
cpu: 1, clocks: 997628, slice: 332542
CPU1<T0:997616,T1:332528,D:4,S:332542,C:997628>
checking TSC synchronization across CPUs: passed.
Waiting on wait_init_idle (map = 0x2)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xfd91b, last bus=4
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 2: assuming transparent
Unknown bridge resource 2: assuming transparent
Unknown bridge resource 2: assuming transparent
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0
PCI->APIC IRQ transform: (B0,I31,P3) -> 19
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
PCI->APIC IRQ transform: (B3,I8,P0) -> 23
PCI->APIC IRQ transform: (B3,I8,P1) -> 19
PCI->APIC IRQ transform: (B4,I13,P0) -> 21
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Non-volatile memory driver v1.1
block: 128 slots per queue, batch=32
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev f9
PIIX4: chipset revision 4
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x10e0-0x10e7, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x10e8-0x10ef, BIOS settings: hdc:DMA, hdd:pio
hdc: HITACHI DVD-ROM GD-8000, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
loop: loaded (max 8 devices)
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
eth0: OEM i82557/i82558 10/100 Ethernet, 00:E0:81:00:2C:74, IRQ 21.
Board assembly 000000-000, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
Secondary interface chip i82555.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x3258698e).
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
IP-Config: Complete:
device=eth0, addr=192.168.77.3, mask=255.255.255.0, gw=192.168.77.1,
host=192.168.77.3, domain=, nis-domain=(none),
bootserver=192.168.77.1, rootserver=192.168.77.1, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Looking up port of RPC 100003/2 on 192.168.77.1
Looking up port of RPC 100005/1 on 192.168.77.1
VFS: Mounted root (nfs filesystem).
Freeing unused kernel memory: 228k freed
Unable to handle kernel NULL pointer dereference at virtual address 00000800
Unable to handle kernel NULL pointer dereference at virtual address 00000400
printing eip:
c018dd5e
*pde = 00000000
Oops: 0002
CPU: 0
EIP: 0010:[<c018dd5e>] Not tainted
EFLAGS: 00010206
eax: 00000400 ebx: f77f7800 ecx: 00000100 edx: 00000800
esi: f77f7800 edi: 00000800 ebp: c2edffc0 esp: f77fbf40
ds: 0018 es: 0018 ss: 0018
printing eip:
c018dd5e
*pde = 00000000
Process loop1 (pid: 29, stackpage=f77fb000)
Stack: 00000800 00000400 00000800 c018dfa5 f7bbb11c 00000001 00000800 f77f7800
00000400 00000002 00000008 f7bbb11c f7bd9c00 f7bbb11c 00000c00 00000c00
f7bbb228 00000002 00000400 00000000 f77f7800 c02233c0 f7a08930 f7ab5e80
Call Trace: [<c018dfa5>] [<c018e265>] [<c018e829>] [<c0105594>]
Code: f3 a5 a8 02 74 02 66 a5 a8 01 74 01 a4 31 c0 5b 5e 5f c3 8d
Oops: 0002
Unable to handle kernel NULL pointer dereference at virtual address 00000800
printing eip:
c018dd5e
*pde = 00000000
CPU: 1
EIP: 0010:[<c018dd5e>] Not tainted
EFLAGS: 00010206
eax: 00000400 ebx: f77f0400 ecx: 00000100 edx: 00000400
esi: f77f0400 edi: 00000400 ebp: c2edc400 esp: f77f5f40
ds: 0018 es: 0018 ss: 0018
Process loop2 (pid: 34, stackpage=f77f5000)
Stack: 00000400 00000400 00000400 c018dfa5 f7bbb238 00000001 00000400 f77f0400
00000400 00000001 00000008 f7bbb238 f7bd9780 f7bbb238 00000800 00000800
f7bbb344 00000001 00000400 00000000 f77f0400 c02233c0 f7a08530 f7ae2900
Call Trace: [<c018dfa5>] [<c018e265>] [<c018e829>] [<c0105594>]
Code: f3 a5 a8 02 74 02 66 a5 a8 01 74 01 a4 31 c0 5b 5e 5f c3 8d
Oops: 0002
CPU: 0
EIP: 0010:[<c018dd5e>] Not tainted
EFLAGS: 00010206
eax: 00000400 ebx: f7a01800 ecx: 00000100 edx: 00000800
esi: f7a01800 edi: 00000800 ebp: c2ff1700 esp: f7a07f40
ds: 0018 es: 0018 ss: 0018
Process loop0 (pid: 23, stackpage=f7a07000)
Stack: 00000800 00000400 00000800 c018dfa5 f7bbb000 00000001 00000800 f7a01800
00000400 00000002 00000008 f7bbb000 f7a00f00 f7bbb000 00000c00 00000c00
f7bbb10c 00000002 00000400 00000000 f7a01800 c02233c0 f7a3ebb0 f7ae2b00
Call Trace: [<c018dfa5>] [<c018e265>] [<c018e829>] [<c0105594>]
Code: f3 a5 a8 02 74 02 66 a5 a8 01 74 01 a4 31 c0 5b 5e 5f c3 8d
#
# Automatically generated by make menuconfig: don't edit
#
CONFIG_X86=y
CONFIG_ISA=y
# CONFIG_SBUS is not set
CONFIG_UID16=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMIII is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_PGE=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_SMP=y
# CONFIG_MULTIQUAD is not set
CONFIG_HAVE_DEC_LOCK=y
#
# General setup
#
CONFIG_NET=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_NAMES=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_HOTPLUG is not set
# CONFIG_PCMCIA is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_PM is not set
# CONFIG_ACPI is not set
# CONFIG_APM is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play configuration
#
# CONFIG_PNP is not set
# CONFIG_ISAPNP is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_LVM is not set
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK is not set
# CONFIG_NETFILTER is not set
# CONFIG_FILTER is not set
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_INET_ECN is not set
CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
# CONFIG_KHTTPD is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_LLC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
# CONFIG_PHONE_IXJ is not set
# CONFIG_PHONE_IXJ_PCMCIA is not set
#
# ATA/IDE/MFM/RLL support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=m
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set
# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set
# CONFIG_BLK_DEV_IDEDISK_IBM is not set
# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set
# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set
# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set
# CONFIG_BLK_DEV_IDEDISK_WD is not set
# CONFIG_BLK_DEV_COMMERIAL is not set
# CONFIG_BLK_DEV_TIVO is not set
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_ISAPNP is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_AEC62XX_TUNING is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_AMD74XX_OVERRIDE is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_HPT34X_AUTODMA is not set
# CONFIG_BLK_DEV_HPT366 is not set
CONFIG_BLK_DEV_PIIX=y
CONFIG_PIIX_TUNING=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX is not set
# CONFIG_PDC202XX_BURST is not set
# CONFIG_PDC202XX_FORCE is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_DMA_NONPCI is not set
CONFIG_BLK_DEV_IDE_MODES=y
# CONFIG_BLK_DEV_ATARAID is not set
# CONFIG_BLK_DEV_ATARAID_PDC is not set
# CONFIG_BLK_DEV_ATARAID_HPT is not set
#
# SCSI support
#
CONFIG_SCSI=m
CONFIG_BLK_DEV_SD=m
CONFIG_SD_EXTRA_DEVS=40
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_SCSI_DEBUG_QUEUES is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_NCR53C8XX is not set
CONFIG_SCSI_SYM53C8XX=m
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=20
# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set
# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_DEBUG is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_BOOT is not set
# CONFIG_FUSION_ISENSE is not set
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LAN is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_I2O_PCI is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_LAN is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_SUNLANCE is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
# CONFIG_SUNLANCE is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_CS89x0 is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_DGRS is not set
# CONFIG_DM9102 is not set
CONFIG_EEPRO100=y
# CONFIG_LNE390 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_NE3210 is not set
# CONFIG_ES3210 is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SK98LIN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Input core support
#
# CONFIG_INPUT is not set
# CONFIG_INPUT_KEYBDEV is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
# CONFIG_SERIAL_CONSOLE is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# I2C support
#
# CONFIG_I2C is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_MOUSE=y
CONFIG_PSMOUSE=y
# CONFIG_82C710_MOUSE is not set
# CONFIG_PC110_PAD is not set
#
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set
# CONFIG_QIC02_TAPE is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_INTEL_RNG=y
CONFIG_NVRAM=y
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_MWAVE is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_REISERFS_FS is not set
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_JBD_DEBUG is not set
# CONFIG_FAT_FS is not set
# CONFIG_MSDOS_FS is not set
# CONFIG_UMSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_TMPFS=y
# CONFIG_RAMFS is not set
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_MINIX_FS=m
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=m
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
# CONFIG_NFSD_V3 is not set
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
CONFIG_ZISOFS_FS=m
CONFIG_ZLIB_FS_INFLATE=m
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_SMB_NLS is not set
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VIDEO_SELECT is not set
# CONFIG_MDA_CONSOLE is not set
#
# Frame-buffer support
#
# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB is not set
# CONFIG_USB_UHCI is not set
# CONFIG_USB_UHCI_ALT is not set
# CONFIG_USB_OHCI is not set
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH is not set
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_DC2XX is not set
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_CATC is not set
# CONFIG_USB_CDCETHER is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_RIO500 is not set
#
# Bluetooth support
#
# CONFIG_BLUEZ is not set
#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Nov 30 2001 - 21:00:34 EST